When the fluid flows through the Verabar flowmeter probe, a high pressure distribution zone is created at the front of it, and the pressure in the high pressure distribution zone is slightly higher than the static pressure of the pipeline. According to the principle of Bernoulli's equation, the velocity of the fluid flowing through the probe is accelerated, and a low pressure distribution area is generated at the rear of the probe. The pressure in the low pressure distribution area is slightly lower than the static pressure of the pipeline.
After the fluid flows from the probe, a partial vacuum is generated at the rear of the probe, and vortices appear on both sides of the probe. The cross-sectional shape, surface roughness, and position of the low-pressure tapping hole of the equal-speed flow probe are the key factors that determine the performance of the probe. The stability and accuracy of the low-voltage signal play a decisive role in the accuracy and performance of the average speed probe.
The Velabar flowmeter average flow rate probe accurately detects the average differential pressure produced by the fluid's average velocity. The power flow probes in the high-pressure and low-pressure areas have multiple pairs of pressure holes arranged according to certain criteria, making it possible to accurately measure the average flow velocity.
The Verabar flowmeter is a plug-in flow measurement instrument. A force transducer is inserted in the pipeline. When the fluid flows through the sensor, a high pressure distribution zone is generated in the forward flow direction of the front and a low pressure distribution zone is generated at the rear.
There are three pairs of pressure-receiving holes in the high and low pressure areas of the Verabar flowmeter sensor, which are arranged in accordance with certain rules. The full pressure of the fluid that is not to be measured includes the static pressure, the average velocity pressure Pl, and the static pressure P2. Introduce P1 and P2 into the differential pressure transmitter, measure the differential pressure â–³P=P1-P2, â–³P reflects the average velocity of the fluid, and then calculate the fluid flow.
Leisuwash 360 Mini Touch Free Car Wash
Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine, leisuwash 360 mini, leisuwash SG fully automatic car wash equipment.
Leisuwash 360 mini touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
Leisuwash 360 mini Automatic Car Wash Machine provide lower investment for car wash owners in order to deliver a better return on investment, specially designed for the car wash bays with limited sizes, suitable for car service station, petrol station, Auto dealers, 4S shop etc. Completely system include under chassis wash system, pre-soak application system, high pressure wash system, overglow Hi-gloss system, wax application system, chemical mixing system, intergrated air drying system, mounting frames.
Touchfree Car Wash,Leisuwash 360 Mini,Car Wash Systems,Leisure Touchless Car Wash
Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdtouchfreecarwash.com