Model NO.: NE15-101.6 and so on
Delivery: 45 Days
Standards: Approved Drawings
Samples: Free
Structure (for Chain): Roller Chain
Trademark: DCC/ CUSTOMER BRAND
Specification: ISO, SGS
Origin: China
HS Code: 7315890000
Model NO.: NE15-101.6 and so on
Delivery: 45 Days
Standards: Approved Drawings
Samples: Free
Structure (for Chain): Roller Chain
Trademark: DCC/ CUSTOMER BRAND
Specification: ISO, SGS
Origin: China
HS Code: 7315890000
Elevator Chain
Elevator chain products have high requirements on wearing resistance and tensile strength. For this purpose, we carry out secondary heat treatment for the rollers and bushings. The two chain components are firstly carburized, and then undergo secondary heat treatment to offer increased surface hardness and core part toughness. These processes ensure improved crushing strength.
As this range of roller chain is primarily used for material lifting in vertical direction, there is a high requirement on its framework firmness so as to prevent the chain getting loosening up. To meet this requirement, we manufacture the product parts with optimized allowance to ensure prefect match, and meanwhile, a hydraulic press is applied to assemble the chain components.
Our elevator chain is commonly used in cement, mining, grain processing, road construction, and steelworks industries. It assists material elevating, and is accommodate to severe working environments. It works normally even if it is attached with heavy dust and hard particles.
Bucket Elevator Chain
Chain type includes NE series, NSE series, NP series, and so on.Â
|
Chain No. |
Pitch P (mm) | Diameter of roller d1 (mm) | Diameter of pin d2 (mm) | Length of pin b2 (mm) | Inner width of inner link b1(min) (mm) | Thickness of sidebar T (mm) | Height of sidebar h2 (mm) | Height of attached plate h2 (mm) | Tensile strength Q (min.)(KN) |
| NE model lifting chain for elevators | |||||||||
| NE15-101.6 | 101.6 | 26.5 | 11.5 | 70 | 27 | 6 | 35 | 35 | 128.1 |
| NE30-152.4 | 152.4 | 35 | 15.5 | 90 | 36.5 | 8 | 50 | 50 | 245 |
| NE50-152.4 | 152.4 | 35 | 15.5 | 90 | 36.5 | 8 | 50 | 110 | 245 |
| NE100-200 | 200 | 42 | 19.1 | 120 | 51.8 | 10 | 60 | 125 | 375 |
| NE150-200 | 200 | 48.5 | 22.23 | 120 | 57.8 | 10 | 60 | 125 | 375 |
| NE300-250 | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 450 |
| NE300-250A | 250 | 63.5 | 31.75 | 146 | 67.4 | 12 | 90 | 150 | 450 |
| NP152.4 | 152.4 | 357 | 15.88 | 88 | 38 | 7.9 | 45 | 105 | 245 |
| FE12600 | 152.4 | 35 | 15.88 | 86 | 36.5 | 7.9 | 45 | 120 | 245 |
| NE100/2L | 200 | 44.5 | 19.05 | 114 | 53 | 10 | 60 | 125 | 400 |
| NE150-B/2L | 200 | 44.5 | 19.05 | 114 | 53 | 10 | 60 | 125 | 400 |
| NE200/2L | 250 | 63.5 | 31.75 | 140 | 67.4 | 12 | 90 | 150 | 750 |
| 9060 G4/4L | 152.4 | 34.93 | 19.05 | 94.5 | 38.1 | 9.5 | 50.8 | 120 | 312 |
| P152.4-A/2L | 152.4 | 36 | 17.33 | 85 | 36.5 | 8 | 50 | 105 | 160 |
| DK 19200M G4/2L | 200 | 38.1 | 15.77 | 86 | 36.5 | 8 | 45 | 125 | 312 |
| NE150-A/2L | 200 | 48.5 | 22.23 | 122 | 57.6 | 10 | 75 | 125 | 529 |
| P152.4 3L | 152.4 | 31.75 | 15.77 | 109 | 54 | 9.6 | 38.1 | 139.7 | 145 |
| P125/2L | 125 | 52 | 17 | 80 | 31 | 8 | 580 | 100 | 219.52 |
| FE12600-S/2L | 152.4 | 34.93 | 15.88 | 86 | 36.5 | 7.9 | 45 | 120 | 160 |
| NE150/2L | 200 | 48.5 | 22.23 | 118 | 57.6 | 10 | 75 | 125 | 529 |
| NE300-250/2L | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 1107 |
| P152.4/2L | 152.4 | 35.7 | 15.88 | 88 | 38 | 7.9 | 45 | 105 | 160 |
| DS17200-S G4/2L | 200 | 40.08 | 19.05 | 106.5 | 50.8 | 9.5 | 50.8 | 130 | 260 |
| P250-G4/2L | 250 | 73 | 38.5 | 183.5 | 82 | 16 | 115 | 180 | 1200 |
| NE300 | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 1107 |
| Chain No. | Pitch P (mm) | Diameter of roller d1 (mm) | Diameter of pin d2 (mm) | Length of pin L (mm) | Inner width of inner link b1 (mm) | Thickness of sidebar T (mm) | Height of sidebar h2 (mm) | Height of attachment h2 (mm) | Tensile strength Q (min.)(KN) |
| NP150 | 150 | 31.8 | 14.17 | 69 | 30 | 6.35 | 38.1 | 105 | 200 |
| NP228.6 | 228.6 | 62 | 24.2 | 136 | 64 | 13 | 70 | 70 | 440 |
| Chain No. | Pitch P (mm) | Inner width of inner link W (mm) | Diameter of roller D (mm) | Sidebar | Pin | Dimension of attachment | Tensile strength(KN) | |||||
| Height H (mm) | Thickness T (mm) | Diameter d (mm) | Length L (mm) | H2 (mm) | N (mm) | X (mm) | Y (mm) | |||||
| NSE200 | 100 | 51.8 | 44.5 | 60 | 10 | 19.1 | 111.5 | 150 | 18 | 100 | 105 | 420 |
| NSE300 | 100 | 57.6 | 48.5 | 75 | 7.5 | 22.23 | 120 | 150 | 18 | 100 | 105 | 520 |
| NSE400 | 125 | 67.4 | 63.5 | 90 | 12 | 31.75 | 139.3 | 180 | 18 | 125 | 130 | 735 |
| NSE500-1 | 125 | 75 | 70 | 100 | 16 | 35 | 170 | 180 | 18 | 125 | 130 | 980 |
| NSE500-2 | 125 | 75 | 71.5 | 102 | 16 | 36 | 165 | 180 | 18 | 125 | 130 | 1200 |
| NSE600H | 125 | 75 | 75 | 105 | 16 | 40 | 165 | 185 | 18 | 125 | 136 | 1260 |
| NSE700 | 150 | 85 | 85 | 125 | 16 | 48 | 180 | 226 | 22 | 150 | 165 | 1470 |
Â
Elevator Chain
Elevator chain products have high requirements on wearing resistance and tensile strength. For this purpose, we carry out secondary heat treatment for the rollers and bushings. The two chain components are firstly carburized, and then undergo secondary heat treatment to offer increased surface hardness and core part toughness. These processes ensure improved crushing strength.
As this range of roller chain is primarily used for material lifting in vertical direction, there is a high requirement on its framework firmness so as to prevent the chain getting loosening up. To meet this requirement, we manufacture the product parts with optimized allowance to ensure prefect match, and meanwhile, a hydraulic press is applied to assemble the chain components.
Our elevator chain is commonly used in cement, mining, grain processing, road construction, and steelworks industries. It assists material elevating, and is accommodate to severe working environments. It works normally even if it is attached with heavy dust and hard particles.
Bucket Elevator Chain
Chain type includes NE series, NSE series, NP series, and so on.Â
|
Chain No. |
Pitch P (mm) | Diameter of roller d1 (mm) | Diameter of pin d2 (mm) | Length of pin b2 (mm) | Inner width of inner link b1(min) (mm) | Thickness of sidebar T (mm) | Height of sidebar h2 (mm) | Height of attached plate h2 (mm) | Tensile strength Q (min.)(KN) |
| NE model lifting chain for elevators | |||||||||
| NE15-101.6 | 101.6 | 26.5 | 11.5 | 70 | 27 | 6 | 35 | 35 | 128.1 |
| NE30-152.4 | 152.4 | 35 | 15.5 | 90 | 36.5 | 8 | 50 | 50 | 245 |
| NE50-152.4 | 152.4 | 35 | 15.5 | 90 | 36.5 | 8 | 50 | 110 | 245 |
| NE100-200 | 200 | 42 | 19.1 | 120 | 51.8 | 10 | 60 | 125 | 375 |
| NE150-200 | 200 | 48.5 | 22.23 | 120 | 57.8 | 10 | 60 | 125 | 375 |
| NE300-250 | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 450 |
| NE300-250A | 250 | 63.5 | 31.75 | 146 | 67.4 | 12 | 90 | 150 | 450 |
| NP152.4 | 152.4 | 357 | 15.88 | 88 | 38 | 7.9 | 45 | 105 | 245 |
| FE12600 | 152.4 | 35 | 15.88 | 86 | 36.5 | 7.9 | 45 | 120 | 245 |
| NE100/2L | 200 | 44.5 | 19.05 | 114 | 53 | 10 | 60 | 125 | 400 |
| NE150-B/2L | 200 | 44.5 | 19.05 | 114 | 53 | 10 | 60 | 125 | 400 |
| NE200/2L | 250 | 63.5 | 31.75 | 140 | 67.4 | 12 | 90 | 150 | 750 |
| 9060 G4/4L | 152.4 | 34.93 | 19.05 | 94.5 | 38.1 | 9.5 | 50.8 | 120 | 312 |
| P152.4-A/2L | 152.4 | 36 | 17.33 | 85 | 36.5 | 8 | 50 | 105 | 160 |
| DK 19200M G4/2L | 200 | 38.1 | 15.77 | 86 | 36.5 | 8 | 45 | 125 | 312 |
| NE150-A/2L | 200 | 48.5 | 22.23 | 122 | 57.6 | 10 | 75 | 125 | 529 |
| P152.4 3L | 152.4 | 31.75 | 15.77 | 109 | 54 | 9.6 | 38.1 | 139.7 | 145 |
| P125/2L | 125 | 52 | 17 | 80 | 31 | 8 | 580 | 100 | 219.52 |
| FE12600-S/2L | 152.4 | 34.93 | 15.88 | 86 | 36.5 | 7.9 | 45 | 120 | 160 |
| NE150/2L | 200 | 48.5 | 22.23 | 118 | 57.6 | 10 | 75 | 125 | 529 |
| NE300-250/2L | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 1107 |
| P152.4/2L | 152.4 | 35.7 | 15.88 | 88 | 38 | 7.9 | 45 | 105 | 160 |
| DS17200-S G4/2L | 200 | 40.08 | 19.05 | 106.5 | 50.8 | 9.5 | 50.8 | 130 | 260 |
| P250-G4/2L | 250 | 73 | 38.5 | 183.5 | 82 | 16 | 115 | 180 | 1200 |
| NE300 | 250 | 70 | 35 | 165 | 75 | 16 | 100 | 150 | 1107 |
| Chain No. | Pitch P (mm) | Diameter of roller d1 (mm) | Diameter of pin d2 (mm) | Length of pin L (mm) | Inner width of inner link b1 (mm) | Thickness of sidebar T (mm) | Height of sidebar h2 (mm) | Height of attachment h2 (mm) | Tensile strength Q (min.)(KN) |
| NP150 | 150 | 31.8 | 14.17 | 69 | 30 | 6.35 | 38.1 | 105 | 200 |
| NP228.6 | 228.6 | 62 | 24.2 | 136 | 64 | 13 | 70 | 70 | 440 |
| Chain No. | Pitch P (mm) | Inner width of inner link W (mm) | Diameter of roller D (mm) | Sidebar | Pin | Dimension of attachment | Tensile strength(KN) | |||||
| Height H (mm) | Thickness T (mm) | Diameter d (mm) | Length L (mm) | H2 (mm) | N (mm) | X (mm) | Y (mm) | |||||
| NSE200 | 100 | 51.8 | 44.5 | 60 | 10 | 19.1 | 111.5 | 150 | 18 | 100 | 105 | 420 |
| NSE300 | 100 | 57.6 | 48.5 | 75 | 7.5 | 22.23 | 120 | 150 | 18 | 100 | 105 | 520 |
| NSE400 | 125 | 67.4 | 63.5 | 90 | 12 | 31.75 | 139.3 | 180 | 18 | 125 | 130 | 735 |
| NSE500-1 | 125 | 75 | 70 | 100 | 16 | 35 | 170 | 180 | 18 | 125 | 130 | 980 |
| NSE500-2 | 125 | 75 | 71.5 | 102 | 16 | 36 | 165 | 180 | 18 | 125 | 130 | 1200 |
| NSE600H | 125 | 75 | 75 | 105 | 16 | 40 | 165 | 185 | 18 | 125 | 136 | 1260 |
| NSE700 | 150 | 85 | 85 | 125 | 16 | 48 | 180 | 226 | 22 | 150 | 165 | 1470 |
Â
It is widely used for the purification
of chemical raw materials gas, chemical synthesis gas, pharmaceutical industry
gas, carbon dioxide gas for beverage and hydrogen, nitrogen, chlorine, hydrogen
chloride, ethane, ethane, crack gas, inert gas and so on. Also used to
remove contaminants from the air, as well as the separation and purification of
the mixed gas.
Column Coal Activated Carbon,Column Activated Carbon,Organic Activated Charcoal,Activated Carbon For Air Purification
Jiangsu Tongrui Environmental Protection Technology Development Co.,Ltd , http://www.swdfilter.com