
Advantage for our special truck
1.Fully integrated into the customer personalized demand and user-friendly design concept,which is the high-end products of the special truck transportation equipment.
2.Strong Power, low fuel consumption, strong climbing ability;Strong flexibility and applicability,lower unloading residual rate,large volume,high efficiency,for the special
  truck.
3.The special truck body and leaf are all made from special fine grain wear plate,Integral forging raceway,which all can guarantee longer&enough life-span.
4.The special truck leaf has the excellent mixing function to make the finished concrete more uniformly,and to maintain the quality of the concrete;High
  strength,toughness beam, minimizing vibration.
5.The fourth axle adpoting American patented technical air suspension,can freely lift and down the lifting axle according to the weight and road environment,for special
   truck.
6.Design of the luxury dashboard.Preferably with the interior material of the cab.Both sound insulation and tightness are good. Indoor noise less than 70 db.
7.The special truck can satisfy Euro2, Euro3 and Euro4 emissions. Light weight, reduce fuel consumption and good economy.
8.Low maintenance cost, integrated design, ultra-long (60,000km) oil change interval and maintenance interval.Electric control high pressure common rail technology,
  Bosch3 technology, the only authorized use in China.
9.The special truck key components are imported from the original, and other major components are sourced globally,to ensure the quality of products.
I'd like to say for our special truck...
Hey, buddy.Please pay attention!Maybe what I said below is not very formal, but I hope you can read it.
I know you want to buy special truck, at least want to understand it.On this very large platform, you happen to see my product, which is very lucky for me.So I think
whether you're going to buy from me or not, but you can get to know the special truck from me.If you do, I will be very happy.Anyway, as long as you want to know
the product, I will try my best to help you.

Parameters of Special Truck | |||
Engine Type | HW-336HP-State5/WP-361HP-EURO4 | Displacement | 7000-11596 ml |
Dimension | optional | Discharge Standard | EURO2-4 |
Total Mass | 15000-30000 kg | Spring Films | 10-13/14-18/12-14 |
Curb Weight | 6500-13500 kg | Loading Capacity | 6000-30000 kg |
Axle Load | 6500/6500/18000 kg | Wheel Base | optional |
Axle Number | 2-4 Axle | Maximum Speed | 80-90 km/h |
Gearbox | Fast 9/10/ | Front and Rear Axle | F-9t / R-16t*2 |
Tire Number | 4/6/10/12(Add a spare tire) | Tyre Size | 11.00R20/12.00R20 |
Front Track | 1986/1940 mm | Rear Track | 1860/1860 mm |
Parameters of Mixing Drum | |||
Material | Alloy steel / Mn-steel-16 / Baosteel-520 | ||
Reduction Box | Germany-ZF / Bonfiglioli / PMP | Hydraulic System | Rexroth / Eaton / PMP |
Water System | 300L(Pneumatic water supply) | Cooling System | OBCC |
Feeding Speed | ≥3  m³/min | Discharge Speed | ≥2  m³/min |
Discharge Residual Rate | ≤0.5% | Operating Mode | Both sides and the cab |
Scope of Discharge | Adjustable | Safety Device | Add the leakage receiving device |
1.The parameters of the special truck are just common configurations, not absolute.The specific configuration of the special truck will be executed according to your
   needs.
2.We also do OEM and ODM.If you are interested in understanding our abilities and thespecial truck, we are always welcome.
3.The final price of all special truck is determined by the special truck configuration you choose.Therefore, if you are interested in purchasing products, please contact
  us in time.


About the details for special truck:
In order to produce a high quality special truck, the details are very important.The important parts we use, such as engines, hydraulic pumps and speed reducers, are
well-known brands in China and even the world.

About the factory for special truck:
Our factory has very advanced equipment, so the production efficiency must meet your order quantity.As you can see in the picture, the production process is very
elaborate.Above all, our workers are very serious and efficient.All I have said above is believable and guaranteed.
About the packing for special truck:
We'll try to help you save transportation costs.We have been in contact with many customers, so we have good ways for special truck transportation.

Advantage for our special truck
1.Fully integrated into the customer personalized demand and user-friendly design concept,which is the high-end products of the special truck transportation equipment.
2.Strong Power, low fuel consumption, strong climbing ability;Strong flexibility and applicability,lower unloading residual rate,large volume,high efficiency,for the special
  truck.
3.The special truck body and leaf are all made from special fine grain wear plate,Integral forging raceway,which all can guarantee longer&enough life-span.
4.The special truck leaf has the excellent mixing function to make the finished concrete more uniformly,and to maintain the quality of the concrete;High
  strength,toughness beam, minimizing vibration.
5.The fourth axle adpoting American patented technical air suspension,can freely lift and down the lifting axle according to the weight and road environment,for special
   truck.
6.Design of the luxury dashboard.Preferably with the interior material of the cab.Both sound insulation and tightness are good. Indoor noise less than 70 db.
7.The special truck can satisfy Euro2, Euro3 and Euro4 emissions. Light weight, reduce fuel consumption and good economy.
8.Low maintenance cost, integrated design, ultra-long (60,000km) oil change interval and maintenance interval.Electric control high pressure common rail technology,
  Bosch3 technology, the only authorized use in China.
9.The special truck key components are imported from the original, and other major components are sourced globally,to ensure the quality of products.
I'd like to say for our special truck...
Hey, buddy.Please pay attention!Maybe what I said below is not very formal, but I hope you can read it.
I know you want to buy special truck, at least want to understand it.On this very large platform, you happen to see my product, which is very lucky for me.So I think
whether you're going to buy from me or not, but you can get to know the special truck from me.If you do, I will be very happy.Anyway, as long as you want to know
the product, I will try my best to help you.

Parameters of Special Truck | |||
Engine Type | HW-336HP-State5/WP-361HP-EURO4 | Displacement | 7000-11596 ml |
Dimension | optional | Discharge Standard | EURO2-4 |
Total Mass | 15000-30000 kg | Spring Films | 10-13/14-18/12-14 |
Curb Weight | 6500-13500 kg | Loading Capacity | 6000-30000 kg |
Axle Load | 6500/6500/18000 kg | Wheel Base | optional |
Axle Number | 2-4 Axle | Maximum Speed | 80-90 km/h |
Gearbox | Fast 9/10/ | Front and Rear Axle | F-9t / R-16t*2 |
Tire Number | 4/6/10/12(Add a spare tire) | Tyre Size | 11.00R20/12.00R20 |
Front Track | 1986/1940 mm | Rear Track | 1860/1860 mm |
Parameters of Mixing Drum | |||
Material | Alloy steel / Mn-steel-16 / Baosteel-520 | ||
Reduction Box | Germany-ZF / Bonfiglioli / PMP | Hydraulic System | Rexroth / Eaton / PMP |
Water System | 300L(Pneumatic water supply) | Cooling System | OBCC |
Feeding Speed | ≥3  m³/min | Discharge Speed | ≥2  m³/min |
Discharge Residual Rate | ≤0.5% | Operating Mode | Both sides and the cab |
Scope of Discharge | Adjustable | Safety Device | Add the leakage receiving device |
1.The parameters of the special truck are just common configurations, not absolute.The specific configuration of the special truck will be executed according to your
   needs.
2.We also do OEM and ODM.If you are interested in understanding our abilities and thespecial truck, we are always welcome.
3.The final price of all special truck is determined by the special truck configuration you choose.Therefore, if you are interested in purchasing products, please contact
  us in time.


About the details for special truck:
In order to produce a high quality special truck, the details are very important.The important parts we use, such as engines, hydraulic pumps and speed reducers, are
well-known brands in China and even the world.

About the factory for special truck:
Our factory has very advanced equipment, so the production efficiency must meet your order quantity.As you can see in the picture, the production process is very
elaborate.Above all, our workers are very serious and efficient.All I have said above is believable and guaranteed.
About the packing for special truck:
We'll try to help you save transportation costs.We have been in contact with many customers, so we have good ways for special truck transportation.
Light Duty Precision Live Center, High Speed Live Center, Light Duty Live Center, machine tool parts in machining. Tail with a taper shank, installed in the machine tool spindle taper or tailstock shaft hole, with its head against the workpiece cone. Can be used to face the complex parts and do not allow the central hole of the supporting parts. The top is mainly composed of a thimble, a clamping device, a shell, a fixed pin, a bearing and a core shaft. Thimble is the top of the inner hole of the center hole or pipe material, on the other end can be top end is a spherical or conical parts, thimble by the clamping device fixed. When the parts are not allowed or can not hit the central hole, the use of the clamping device to clamp the turning. The shell and the core shaft drill with pin hole, removing of the fixed pin pin or, to achieve the top two. Top can also be used for the work of the drilling, casing and hinge hole.
We are specializing in the production of Live Cente, we can to figure to sample processing, and perfect after-sales service and technical support. Looking forward to your cooperation!
Light Duty Precision Live Center
Live Center,Precision Light Duty Live Center,Light Duty Live Center,Light Duty Precision Live Center
JINING QINFENG MACHINERY HARDWARE CO.,LTD , https://www.qftoolholder.com