Wear-resistant, corrosion-resistant, easy to clean without dead ends, long life design. Free-running, variable flow control, fewer spare parts, reduced maintenance costs and downtime, self-priming (dry suction) up to 5 meters, rugged and tough. Self-lubricating, non-polluting valve assembly. No circuit design, used in riot places.
Pneumatic diaphragm pump (RW-50) Material: a variety of brands: Rudi Model RW50
Scope: Petroleum, chemical, water treatment, environmental protection, paint and other products alias 2: inch metal diaphragm pump flow 34080 (m3 / h)
Air consumption: 4.9m3 / min
The maximum supply pressure: 8.4MPa
Allowable particle value: 6.3 (mm)
Suction: 5.48 (m)
Outlet pressure: 8.4 (Mpa)
Head 5.48 (m)
Fluid pressure up to 120psi
Patented air valve for on-line service eliminates the need to open the cavity epoxy coating to withstand harsh working conditions.
Pneumatic Diaphragm Pump (100 E-CTFE)
Main Break Structure Material: Boxer 100 E-CTFE
Suction outlet G1 1/2 "Compressed air inlet G 1/2"
Maximum dry suction height 6m maximum lift 70m
High flow 40 | / min
Maximum air supply pressure 7bar
Allow to pass the largest particle diameter 6mm
Net weight pp 21Kg The maximum temperature of 60 ℃ ECTFE 32Kg The maximum temperature of 90 ℃
The main structure of different materials, will be slightly different
Pneumatic diaphragm pump (VA40PPPPTFTF)
Common models:
VA08-80-PP-PP-TF-TF, VA08-80-GE-GE-GE, VA08-80AL-SP-SP-SP, VA08-80-AC-AC-TF-TF
Features:
1, oil-free pressure chamber, free lubrication 2, pneumatic chamber with ceramic valve, high wear resistance 3, low pressure, slow operation, never card machine 4, the central axis of stainless steel, corrosion resistance, long diaphragm life 5, the pressure chamber is anodic treatment and epoxy coating, good corrosion resistance, suitable for high-pollution applications 6, aluminum alloy materials are anodized 7, less parts, easy assembly 8, self-absorption ability of the flow range: 18.9 L / min ~ 62.5m3 / h Material: PP, PVDF, Aluminum Alloy, SS316L, Cast Iron, Acetal, Size: 1/4 ", 3/8", 1/2 ", 3/4", 1 ", 1-1 / 2", 2 ", 3".
More Keyword Search: Diaphragm Pumps
A small safety part in an automobile electrical device or piece of machinery that causes it to stop working if the electric current is too high, and so prevents fires or other dangers. Fuse, also known as current fuse, is defined by the IEC127 standard as "fuse-link". It is mainly an overload protection. If the fuse is properly installed in the circuit, the fuse will cut off the current and protect the circuit safe operation when the current abnormal is raised to a certain height and heat. Invented by Edison fuse is used to protect more than one hundred years ago when the expensive incandescent bulbs, along with the development of The Times, the fuse protection power equipment is not trained in current overheat damage, avoid electronic equipment serious damage caused by internal fault. When a circuit breaks down or is abnormal, the current increases with the current and the increased current may damage some important components in the circuit, and it may also burn the circuit and even cause a fire. If correctly placed in the circuit fuse, the fuse will be abnormal current increases to a certain height and heat, its own fuse to cut off the current, so as to protect the safe operation of the circuit.
Auto Fuses
Auto Fuses,Thermal Fuse,Temperature Fuse,Auto Glass Tube Fuse
SHINING BLICK ENTERPRISES CO., LTD. (Heshan Jianhao Lighting Industrial Co., Ltd.) , https://www.sunclubtw.com