The steel plate shot blasting machine is mainly used for surface treatment (namely preheating, rust removal, paint spraying and drying) of steel plate and various structural sections, as we11 as for cleaning and strengthening of metal structural parts.
Advantages;
1.The whole roller conveyor system speed is adjusted by frequency converter. The whole system not only can be operated synchronuously, but also every part can move separately. It can rotate forward and backward.
2. Rollers in blasting chamber are protected by special material jacket to prevent abrasive blasting.
3.blast wheels, adopt Swiss GF technological , whose abrasive flow volume is 120kg/min, blasting speed ≥78m/s, blade life ≥800hs, distributing impeller and control cage≥1000hs, line plate and protective plate≥1500hs,
4.Abrasive cleaning (patent)
  * first step cleaning: "<"plough shope scraper, polyurethane material, three layers ladder-like           distribution, high effeciency.
 *second step blow: high pressure blower will blow off abrasive and dust. Reserved compressed air      additional blow pipeline is reserved.
5.We adopt the most advanced adjustable full curtain & multistage winnowing separator. Special Polyester wire core is used for elevator driving belt, Elevator driving wheel use mouse cage structure, preventing driving belt skidding. There are abrasive control device and replenish abrasive device. Every driving point has one alarm device.
6.This machine use inertia settlement chamber plus pulse reverse blow bag type dust collector. Dust concentration of exhausted air is less than 80mg/m3.
7.PLC control system.This machine has a visualized dynamic simulation monitoring system, which can automatically find the failure position and timing wear resistable parts operation time, which will give important information to calculate spare part service time and maintenance time.
Parameters;
Our machine most are customized, following datas just for your reference.
item\type | QXY1600 | QXY-2000 | QXY2500 | QXY3500 | QXY4000 | QXY4500 | QXY5000 | ||
steel palte | width | m | 0.8-1.5 | 0.8-2 | 0.8-2.5 | 1-3.5 | 1.0-4 | 1-4.5 | 1.0-5 |



Packing;
plywood box or nude packing

Aftersale service;
2.The exwork product is good quality and has stable performance.
5.The seller supplies spare parts for the machine they sold. The seller has a sufficient inventory warehouse.

AVIC EXCELLENCE FORGING is a member and the only forging processing center in east China of AVICHM.We are the professional manufacturer of special shaped ring forgings in China.
We can provide customized service to customers with all kinds of seamless rolled rings, includes:carbon steel forging, alloy steel forging, stainless steel forging, aluminium forging, titanium alloy forging, and super alloy forging.
Our ring forging products are applied to petrochemical equipment,Wind power equipment, nuclear power equipment and other new energy equipment,ocean engineering equipment, mechanized equipment, oil and gas equipment, gas turbine engine, aerospace and military project.
Covers kinds of products:Flange,tube sheet, wind power flange and bearing,gear ring,slewing bearing,yaw pitch bearing, forged rim and so on.We can produce all kinds of high cylinder forging, wide thickness seamless rolled ring, the outer diameter of rolled rings from 600mm to 9000mm,and the height can be reach 1500mm.
AVIC EXCELLENCE FORGING have two forging lines, one line equipped 4000 tons hydraulic pressure machine and OD6300mm rolled ring machine, another line equipped 5000 tons oil pressure machine and OD9000 mm rolled ring machine. The annual capacity of forging manufacture is 60000 tons . We also have over ten sets all kinds of heat treatment furnaces, and could do normalizing, annealing, quenching, tempering, aging, solid solution and so on. The outer diameter of biggest furnace is 8500mm.
AVIC EXCELLENCE FORGING also have over ten sets different size vertical lathes, from 1.6 m to 8 m.At the same time, AVIC Excellence Testing Center is the only testing center of AVIC Metal Test Technology Co. Ltd. a third party service platform of AVIC Industry, very important. And, it is an experienced, capable and highly qualified state-level third party testing platform. We have equipped SPECTRO direct-reading spectrometer, high temperature tensile tester, low temperature impact tester, hardness tester, metallographic testing equipment, ultrasonic fault detector and other Physical and chemical inspection analysis equipment.
AVIC EXCELLENCE FORGING has obtained the ISO9001, IS14001, AS9100, PED, different kinds of classification society certificate, such as CCS, ABS, DNV GL, LR, BV, RINA. At the same time, the establishment of a strict and scientific management system provides the high quality of products.
AVIC EXCELLENCE FORGING relies on the high quality products and thoughtful service to win the trust of the market and the establishment of a lasting relationship with customers.As so far, the company has pioneered in the United States, Brazil, Germany, Belgium, Russia, Turkey, Australia, India, Singapore, South Korea, durban, represented by regional markets such as Europe, America, Oceania, southeast Asia, South Africa.
AVIC EXCELLENCE FORGING is willing to cooperate sincerely with friends from home and abroad, and establish the lasting and mutual trust relations of cooperation,and make brilliant innovation together in future.
Forgings For Aviation,Gear Shaft For Aircraft Engine,Alloy Aluminium For Aerospace,Aerospace Turbine Forging
AVIC EXCELLENCE FORGING (WUXI) CO.,LTD. , https://www.avicforging.com