Model NO.: CYJ Series
Control: Manual Control
Weight: 100-500Kg
Power Source: AC380V
Oil Cylinder Position: Under
Power: 380V
Trademark: SHENLI
Transport Package: Wooden Case with Fumigation Certificate
Specification: 1000kN
Origin: Shanghai, China
HS Code: 90241090
Model NO.: CYJ Series
Control: Manual Control
Weight: 100-500Kg
Power Source: AC380V
Oil Cylinder Position: Under
Power: 380V
Trademark: SHENLI
Transport Package: Wooden Case with Fumigation Certificate
Specification: 1000kN
Origin: Shanghai, China
HS Code: 90241090

CYJ series dumbbell sample prototype is mainly used in iron and steel enterprises, universities and other production test metal sheet materials, dumbbell type standard sample processing; punching a wide range of mold selection of a single device can be applied to a variety of shapes of standard samples stamping
Â
2, after the stamping of the sample automatically fall in the sample collection box
3, stamping range plate thickness 0.2-3mm, sample width 12.5mm20mm (need to replace the mold)
4, punching speed 20-100mm / min
5, the host size 1200X700X1825
6, the motor power 2.2kw
7, power AC380V ± 10% three-phase four-wire
8, weighs about 2500kg
Instructions
1, open the device power.
2, open the pump.
3, prepare the stamping material (in accordance with the width of the mold groove to cut into a long strip of steel)
4, loading stamping materials (the cut into a long strip of material into the mold)
5, stamping (loading stamping material after pressing the foot switch, so that the pressure under the pressure of the mold only to the sample drop)
Repeat steps 3-5 for the next production.
Â


Â
- Structural principle and main parameters
2, after the stamping of the sample automatically fall in the sample collection box
3, stamping range plate thickness 0.2-3mm, sample width 12.5mm20mm (need to replace the mold)
4, punching speed 20-100mm / min
5, the host size 1200X700X1825
6, the motor power 2.2kw
7, power AC380V ± 10% three-phase four-wire
8, weighs about 2500kg
Instructions
1, open the device power.
2, open the pump.
3, prepare the stamping material (in accordance with the width of the mold groove to cut into a long strip of steel)
4, loading stamping materials (the cut into a long strip of material into the mold)
5, stamping (loading stamping material after pressing the foot switch, so that the pressure under the pressure of the mold only to the sample drop)
Repeat steps 3-5 for the next production.
Â
1,Capacity:Â | 1000kN |
2,Punching range: | 1~8mm(Need to replace the mold) |
3,Punching speed: | 20~100mm/min(Adjustable) |
4,Power: | 380V±10% |


Â

CYJ series dumbbell sample prototype is mainly used in iron and steel enterprises, universities and other production test metal sheet materials, dumbbell type standard sample processing; punching a wide range of mold selection of a single device can be applied to a variety of shapes of standard samples stamping
Â
2, after the stamping of the sample automatically fall in the sample collection box
3, stamping range plate thickness 0.2-3mm, sample width 12.5mm20mm (need to replace the mold)
4, punching speed 20-100mm / min
5, the host size 1200X700X1825
6, the motor power 2.2kw
7, power AC380V ± 10% three-phase four-wire
8, weighs about 2500kg
Instructions
1, open the device power.
2, open the pump.
3, prepare the stamping material (in accordance with the width of the mold groove to cut into a long strip of steel)
4, loading stamping materials (the cut into a long strip of material into the mold)
5, stamping (loading stamping material after pressing the foot switch, so that the pressure under the pressure of the mold only to the sample drop)
Repeat steps 3-5 for the next production.
Â


Â
- Structural principle and main parameters
2, after the stamping of the sample automatically fall in the sample collection box
3, stamping range plate thickness 0.2-3mm, sample width 12.5mm20mm (need to replace the mold)
4, punching speed 20-100mm / min
5, the host size 1200X700X1825
6, the motor power 2.2kw
7, power AC380V ± 10% three-phase four-wire
8, weighs about 2500kg
Instructions
1, open the device power.
2, open the pump.
3, prepare the stamping material (in accordance with the width of the mold groove to cut into a long strip of steel)
4, loading stamping materials (the cut into a long strip of material into the mold)
5, stamping (loading stamping material after pressing the foot switch, so that the pressure under the pressure of the mold only to the sample drop)
Repeat steps 3-5 for the next production.
Â
1,Capacity:Â | 1000kN |
2,Punching range: | 1~8mm(Need to replace the mold) |
3,Punching speed: | 20~100mm/min(Adjustable) |
4,Power: | 380V±10% |


Â
Manual Food Chopper,Hand Held Food Chopper,Stainless Steel Manual Food Chopper,Garlic Chopper
Wenzhou Yingjie Arts and Crafts Co.,LTD , https://www.wzyingjie.com