Basin Injection Molding Machine Plastic Screw Type

  • Model NO.: LSF398S
  • Structure: Horizontal
  • Plasticizing Way: Screw Type
  • Automation: Automatic
  • Certification: CE, ISO9001:2008
  • Color: Customized
  • Transport Package: Standard Packing
  • Origin: China
  • Type: Injection Molding
  • Plastic Type: Thermoplastic
  • Clamping Way: Hydraulic & Mechanical
  • Computerized: Computerized
  • Voltage: Customized
  • Trademark: LONGSHUN
  • Specification: ISO9001
  • HS Code: 84771010
We are specialzied in making all sizes of small parts product, such as spare parts for hardware, and we provide complete production line for plastic clip injection machine.
Application and Features:
LONGSHUN Plastic-Injection Molding Machines are applicable to injection molding of various kinds of thermoplastics, and have following features:
1. Adopting double-cylinder injection, with multilevel injection, pressure maintaining and anti-dribbling action, high injection pressure, and fast speed.
2. Low-speed high torque hydraulic motors drive screws directly, stepless speed changing is achieved.
3. Adopting five-pivot point double-elbow hydraulic machinery clamping devices, for energy saving and stable movement.
4. Adopting computer control, proportional electro-hydraulic drive, auto-alarm, fail safe, high degree of automation.
5. The machine has Manual mode, Semi-automatic mode and Automatic mode. Automatic mode includes Electric Eye automatic and Time automatic for users to choose.
6. The machine has an electrical safety duplicate protection device, which is safe and reliable to be operated.
7. Hydraulic components are designed to be outside the machine, which is easy for installation and maintenance.
item unit LSF398
A B C
screw diameter mm 70 75 80
screw L/D ratio L/D 21.4 20 18.8
theoretical shot size cm 3 1385 1590 1809
injection weight g 1260 1447 1646
Injection  rate g/s 310 356 405
Plasticizing capacity g/s 60 65 70
Injection  pressure Mpa 195 158 139
Screw speed rpm 0-165
Clamp  force KN 3980
Space  between tie  bars mm 720*720
Toggle  stroke mm 700
Max. mold height mm 760
Min. mold height mm 280
Ejector stroke mm 200
Ejector tonnage KN 110
Ejector number p 13
Max.pump pressure Mpa 16
Pump  motor power KW 37
Heater  power KW 24.8
Machine dimension m 7.3*2.0*2.2
Machine  weight t 16

Gravitational Gold Concentrator

It is suitable for the recovery of single gold in placer gold, vein gold mines and polymetallic mines, instead of mercury plate operations. The addition of large single gold particles in the collected ore before flotation can further increase the recovery rate of gold mines, and it can also be used from gold-bearing mines. Separate single gold from flotation gold-copper concentrate and flotation gold concentrate.The device has the following characteristics:

1.Wide application field: the device can regenate various types of activated carbonon by adjusting the angle and rotational speed of furnace pipe.

2.Regeneration activated carbon in the oven retention time 40 minutes, which is applicable to the regeneration levelofall kinds of grain particles, for coal activated carbon also has good regeneration effect.

3.High degree of automation:the device operation achieves automatic control,with man-machine interface+Intelligent instrument control,reduces the operating workers and the labor intensity is low.

4.High recovery rate of Iodine value:basically returned to a new carbon levels above 90%.

5.Low carbon loss:≤1-2%(Coal carbon)But slightly higher than the JHR-O series activated carbon fuel diesel reclamation equipment

6.Easy installation, covers an area slightly larger, but the small space height requirements, large installed power.

Long service life:The core components furnace tube using thick wall (10 mm thick) 1200 ℃ high temperature resistance, corrosion resistant special stainless steel pipe.

Gravitational Gold Concentrator,Gold Extraction,Gold Recovery Equipment,Gold Washing Equipment

Changchun Gold Research Institute Co.LTD , https://www.ccgrizbs.com