Plastic Filament Extruder for ABS PLA 3D Printing Filament

plastic filament extruder for ABS PLA 3D printing filament

Professional 3D Filament Extruder Supplier has been used by designers, engineers and scientists to produce the disposable mechanical products and model, and it is already widely used in health care, education, toys, building, automobile, electronics, and anime field.

Feature:
1. Information of the PLA, PA Nylon, PC ,and HIPS and ABS filaments,
2. ABS filament process temperature is 230-260° C,melting point is 230° C
3. PLA 3D printer filament is 210-235°C, melting point is 200°C
4. PVA temperature for printer is 180°C-200°C.Melting point is 200°C.
5. PA  Nylon temperature for printer is 220°C-250°C.Melting point is 260°C 
6. PC temperature for printer is 230°C-250°CMelting point is 260°C. 
7. HIPS filaments temperature for printer is 160°C-220°C,Melting point is 230°C. 

Detailed information : 
1. Produce process 
I .  Before produce extruding filament ,we will dry ABS and PLA for a enough time (1-1.5 hours). 
II.  Mix with colors masterbatch or colors powder, all which .
III. Adjust temperature and dragging rate , make filament diameter range at 1.7-1.8mm/2.95-3.05mm, roundness +/-0.05mm, each spool net weight 1kg+/-0.02kg 
Any question,please call me. 
MOB&waspp: +8613773240086
  plastic filament extruder for ABS PLA 3D printing filament

Professional 3D Filament Extruder Supplier has been used by designers, engineers and scientists to produce the disposable mechanical products and model, and it is already widely used in health care, education, toys, building, automobile, electronics, and anime field.

Feature:
1. Information of the PLA, PA Nylon, PC ,and HIPS and ABS filaments,
2. ABS filament process temperature is 230-260° C,melting point is 230° C
3. PLA 3D printer filament is 210-235°C, melting point is 200°C
4. PVA temperature for printer is 180°C-200°C.Melting point is 200°C.
5. PA  Nylon temperature for printer is 220°C-250°C.Melting point is 260°C 
6. PC temperature for printer is 230°C-250°CMelting point is 260°C. 
7. HIPS filaments temperature for printer is 160°C-220°C,Melting point is 230°C. 

Detailed information : 
1. Produce process 
I .  Before produce extruding filament ,we will dry ABS and PLA for a enough time (1-1.5 hours). 
II.  Mix with colors masterbatch or colors powder, all which .
III. Adjust temperature and dragging rate , make filament diameter range at 1.7-1.8mm/2.95-3.05mm, roundness +/-0.05mm, each spool net weight 1kg+/-0.02kg 
Any question,please call me. 
MOB&waspp: +8613773240086
 

Expanded Metal Mesh

Expanded metal is a type of sheet metal which has been cut and stretched to form a regular pattern (common diamond-shaped) of metal mesh like material.

Expanded Metal Benefits

√ It is stronger than an equivalent weight of wire mesh such as welded mesh, chain link mesh, because the material is flattened, allowing the metal to stay in one piece.

√ The other benefit to expanded metal is that the metal is never completely cut and reconnected, allowing the material to retain its strength.

Expanded Metal Commonly Uses

· Metallic lath to support plaster or stucco

· Fences

· Filter

· Anti-theft for doors and windows

· Safe passage

· Corridor stair baffle

· Working platforms

· Escalators

· Walkways

· Ceiling

· Grates

Mesh Metal Sheet,Steel Expanded Metal,Stainless Steel Expanded Metal Mesh,Expanded Steel Mesh Sheet

HEBEI JUNTAN METAL PRODUCTS CO., LTD. , https://www.juntanwiremesh.com