
Cast Iron /Ductile Iron  Double Offset Butterfly ValveÂ
BS/DIN/ANSI/JIS Â Butterfly Valve
- Double Offset Butterfly Valve
- Flanged Butterfly Valve
- Wafer Butterfly Valve
- Lug Butterfly Valve


Â
Butterfly Valve
Double Offset Butterfly Valve
PRODUCTION STANDARD
Â
Design | TS EN 593 |
End connection | Flanged TS EN 1092-2 / ISO 7005-2 |
Face To Face | TS EN 558 Seri 14 / DIN 3202 F4 |
Test | TS EN 12266-1 |
Marking | TS EN 19Â |
Features
• Eccentric action reduces torque and seat cantact during operation extending valve lift
• Suitable for on/off and modulating service
• Face to Face isin accordance with ISO5752, AS4795 and EN558 seriers 14
Double flanged butterfly valves
• Epoxy Back Seat ensures on corrosion behind the seating area
• Dovetail Seat Locking construction eliminates the need for seat retaining mechanisms
that can loosen and corrode
• Subject to size and damage, the seat can be repaired in the field and in certain cases
repaired from outside the valve without disassembly from the main line
• All iron Parts are fusion boned epoxy coated for corrosion resistance and long life
• Lifting lugs and foot mounting points are integral to the body for easy transportation
• Fully rated bi-directional design
• Top plates are in compliance to ISO5211 for mounting actuators
• Disc connection to shaft is by blind bolting eliminating potential leak paths
• Body and Disc consturction is ductile iron for higher stength and ligher weight
• All valves have raised face flanges
• Optional 316 stainless steel disc edge coating using HVOF profess
• All flange holes are drilled through
Applications
Waste Water, Distribution Lines, Water Treatment, HVAC
Temperature
+130 °C (EPDM)
+78 °C (NBR)
Specifications
Â
NO. | PARTS Â NAME | Â MATERIAL | QTY | Â | ||||||
1 | BODY | GGG50 | 1 | Â | ||||||
2 | STEM | SS416 | 1 | Â | ||||||
3 | DISC | GGG50 | 1 | Â | ||||||
4 | SEAT | EPDM | 1 | Â | ||||||
5 | BUSHING | P.T.F.E. | 4 | Â | ||||||
6 | O-RING | EPDM | 1 | Â | ||||||
7 | PIN | SS416 | 2 | DNLY 2-5 ONEPN | ||||||
8 | LEVER | Cast Iron | 1 | Â | ||||||
9 | INDICATOR | CARBON STEEL | 1 | Â | ||||||
TEST PRESSURE |
 | SHELL | SEAL | |||||||
 | HYDROSTATIC | 24 Kg/cm2 | 17.6 Kg/cm2 | |||||||
 | AIR |  |  | |||||||
STANDARD | DESIGN CODE | BS 5155 | ||||||||
 | INSPECTION & TEST | DIN 3230 PART 3 | ||||||||
 | END STANDARD | DIN PN16 | ||||||||
 | FACE TO FACE | DIN 3202 K1 | ||||||||
TITLE : LEVER WAFER BUTTERFLY VALVE DN50-DN300 | ||||||||||
APPROVED | Â | DWG NO. | REV | |||||||
CHECKED | Â | Â | Â | |||||||
DEAWN | Â | Â | Â | |||||||
DESIGNED | Â | SCALE | Â | UNIT | mm |
Certificate: ISO9001, CE0035, WRAS
U section flanged butterfly valveÂ
Design: EN593/API609
Class: PN10/16, 125Lbs
Face to face: API 609; EN558 1-20 Series
Flange Connection: GB, DIN, BS, JIS, ANSI
Testing: API 598
Size:DN50-DN1200
Operator: Handle Lever, Worm Gear, Electrical Actuator, Pneumatic Actuator
Material:
Body: Cast Iron (ASTM A126CL. B , DIN1691 GG25, EN 1561 EN-GJL-200,EN-GJL-250); Ductile Cast Iron (ASTM A536 65-45-12, DIN 1693 GGG40, EN1563 EN-GJS-400-15); Stainless Steel (ASTM A351 CF8, CF8M; CF3, CF3M); Carbon Steel (ASTM A216 WCB)
Stem: Stainless Steel (ASTM A276 Type 316, Type 304, Type 410; ASTM A582 Type 416)
Taper Pin: Stainless Steel (ASTM A276 Type 410,Type 304, Type 316)
Seat: NBR, EPDM, Neoprene, PTFE, Viton
Disc: Nickel Plated Ductile Cast Iron (ASTM A536 65-45-12, DIN 1693 GGG40, EN1563 EN-GJS-400-15); Stainless Steel (ASTM A351 CF8, CF8M; CF3, CF3M; EN 1.4408, 1.4469); AL-Bronze (ASTM B148 C95400)
O-Ring: NBR, EPDM, Neoprene, Viton
Bushing: PTFE, Lubricated Bronze

Why Choose US
We are a professional manufacturer and supplier of valves, pipes and fittings which are widely used for water, oil and gas pipe lines
We have been supplying the valves and fittings to Europe, Asia, Middle East countries and Amercian markets for 15 years
Our factory has obtained ISO9001, CE0035 and API approval certificates for our valves and fittings made of iron, steel and copper alloy with design to DIN, BS, ANSI, JIS standard
We can also manufacture valves and fittings according to client's design
We test leakage of each roll before braiding, then we cut 300mm and crimp it to test
burst pressure after brading.
We use CNC Lathes Machine for end fittings production. Machine system, knife and inspection
tools are all imported from Japan.
We use Techmaflex Crimping Machine which is imported from France. This machine has
accurate and stable performance for crimping because it is produced for PTFE hose crimping only.
Our service
We promise the quality for 24 months and also supply custom service
Long service life. Standing the test of thousands opening/closing operation.
Wide selection of materials, applicable for various media.
other productsÂ

Contact to this supplier

  http: www.junyuan-group.com    www.xbvalve.net
PP Spunbond Composite Nonwoven Machine
Longyi company combines its many years advantages in the field of textile bonded and melt blown nonwovens equipment, perfectly finishes the two countries spinning project of SMS composite nonwovens production line equipment and the field of melt blown nonwovens at present, and then successfully develops spunbond, melt blown and melt spun composite products. The product has eniment improvement in aspects of fiber fineness, handle, strength, uniformity and melt blown fiber superfine, uniformity, filtration performance, barrier performance. The product can widely be used for the fields of medical treatment, nursing, personal hygiene, industrial protection and environmental protection.
Majoring Technology Characteristics:
1. Meltblown system can entirely rise or lower to adjust technologies and be spun off-line, which makes for produce operations and the links of each system.
2. Meltblown system components way is rapid changing way, this patent technology spends the times of components changing less 95% than traditional way. It is easy to operate and greatly boosts the production efficiency and economic benefits.
3. Meltblown system adopts unique low pressure spinning net forming technology and has simple equippments , which expends lower energy and conveniently uses.
4. The net forming machine adopts the frame structure which is suitable for high-speed production. The anti-static mesh curtain, preloading roller and idler actively control frequency to ensure the consistency and uniform trafficability of the fiber web.
Spunmelt Composite Nonwoven Machine,PP Spunmelt Composite Nonwoven Machine,PP Spunbond Composite Nonwoven Machine Manufacturer
Dengzhou Longyi Machinery Co., Ltd , https://www.nylongyi.com