From July 6th, Volvo Car China will adjust the recommended retail price of the basic maintenance service package, with an average decrease of 10%, and some models will fall by 23%. At the same time, the recommended retail price of common accessories fell by an average of 10-17%, and some parts fell by more than 50%. Consumers can use the Volvo official website to find out the recommended retail price for after-sales service, basic maintenance service packages and items.
The recommended retail price adjustment for this after-sales basic maintenance service package is mainly for labor, oil and accessories. The labor single working hour fee was adjusted from the original price to the suggested retail price of 450 yuan / hour; with the support of new technology, the oil provided consumers with 5W/30 as the new choice for the basic maintenance of the whole car, still providing 0W/ 30 and 0W/20 oil as high-performance optional products, consumers can choose according to their needs; adjust the suggested retail price of more than 2100 accessories, covering maintenance parts, wearing parts, repair parts, body parts, etc., consumers are most concerned about The price of brake pads, wipers and other spare parts has been lowered, and the drop rate has reached 15% again, while the price of the most commonly used maintenance parts has dropped by 11%-50%.
In addition, local body parts such as windshield, etc., are reduced by 3-30%, while other accessories have different price cuts. The price adjustment made the system transparent and publicized on the official website. At the same time, Volvo Cars and dealers continue to implement a customer loyalty improvement program, offering differentiated discounts based on the different years of the vehicle, up to a 25 percent discount on working hours and materials.
Take the Volvo flagship sedan's new S90 T4 model as an example. The conventional maintenance uses 5W/30 engine oil and the original machine filter. After the price adjustment, the proposed retail price (including working hours, including tax) is reduced by 22.4%.
Extrustion Blow Molding Machine
Blow moulding machines can be divided into three categories: extrusion blow moulding machines, injection blow moulding machines and special structure blow moulding machines. Stretch blow molding machines can be classified into each of the above categories. Extrusion Blow Molding Machine is the combination of extruder, blow molding machine and die closing mechanism, which is composed of extruder and blank die head, blow expansion device, die closing mechanism, blank thickness control system and transmission mechanism. The blank die is one of the important components that determine the quality of blow molding products, usually including the side feed die and the center feed die. The storage cylinder type blank die head is often used for large products during blow molding. The minimum volume of the storage tank is 1kg and the maximum volume is 240kg. The parison thickness control device is used to control the parison wall thickness. The maximum control point is 128 points, generally 20~30 points. The extrusion blow molding machine can produce hollow products with a volume range of 2.5ml~104l.
Injection blow molding machine is the combination of Injection Molding Machine and blow molding mechanism, including plasticizing mechanism, hydraulic system, control electrical apparatus and other mechanical components. Common types include three-station injection blow molding machine and four-station injection blow molding machine. The three-station machine has three stations for preforming, blowing and demoulding, each of which is separated by 120 °. The four-station machine has more pre-forming stations, each of which is separated by 90 °. In addition, there is a dual-station injection blow molding machine with 180 ° between stations. The plastic containers produced by the injection blow molding machine are accurate in size and do not need secondary processing, but the mold cost is high.
The special structure blow molding machine is a blow molding machine that uses sheet, molten material and cold blank as parison to blow mold hollow body with special shape and purpose. Due to the different shapes and requirements of the products produced, the structure of the blow molding machine is also different.
Extrustion Blow Molding Machine,Pe Extrustion Blow Molding Machine,Pet Stretch Blow Moulding Machine,Injection Stretch Blow Molding Machine
Ningbo Chenwei Machinery Technology Co.,Ltd , https://www.chenweimachinery.com