As a precision testing instrument, the constant temperature and humidity testing machine should pay more attention to maintenance during daily use, especially for the humidifying system that realizes the humidity environment. How to maintain the humidifying system of the constant temperature and humidity test chamber? The following Shanghai Bao test will give you an analysis of the maintenance measures of the humidification system:
1. When the surface of the wet gauze is not clean or hardened, or the equipment is not used for a long time, the wet ball gauze needs to be inspected or replaced before the next humidity test. The wet ball gauze in the box is recommended to be replaced as appropriate. Generally, it can be replaced once every three months, according to its own frequency of use. This can avoid the humidity display of the constant temperature and humidity test chamber is 100% or the temperature can not be added or fluctuated. Phenomenon
2, constant temperature and humidity test chamber humidifier is recommended to use pure water to humidify, to prevent the effect of humidification, as well as to prevent dust from cleaning in time will lead to the load of the transducer, burned transducer and electronic components.
3. Regularly change the water in the water tank. Because the water storage time is too long, the water quality will change, which will cause interference to the test results. Therefore, do not put water in the water tank and the water tank when not used for a long time.
4. Do not add inferior additives to the water tank. This will easily cause cracks in the water tank and the watering part of the base, thus affecting the normal operation of the machine.
5. When the humidifier is stored, please clean and dry the water. It is recommended to place it in a ventilated place and put it into the box for proper storage.
Peugeot Rear Shaft,Peugeot Shaft,Peugeot Rear Axle Shaft,Peugeot Rear Arm Bearing
Changzhou Yinxin juchuang Automobile Bearing Factory , https://www.yxjcautobearing.com