After the caution period, it is not necessary to change the engine oil in time, but if the period of caution is not completed, replacing the high-quality engine oil between the running-in periods is very beneficial to the engine.
After a cautious period, the car's speed can be increased appropriately, but it's better not to exceed 120 km/h. The road surface can also be slightly rougher, but you still need to be careful. Whether it's a 3,000-kilometer or 5,000-kilometer run-in period, don't just top it up to do maintenance. Take a little earlier, change the change, and then check the whole car so that the reasonable first-time maintenance is complete on the future of the vehicle. Help is very big.
Secondary maintenance lubrication content increased
The number of second-time maintenance kilometers of the car is about 12,000 kilometers. Here, the oil is mainly talked about. Many car owners have paid attention to engine oil, but they have been ignored elsewhere. During the secondary maintenance, it is best to replace the transmission oil, steering oil, and reducer oil. In terms of machinery, we must do some big checks on the part of the engine, such as the chassis, especially the brake system. The replacement must be replaced in time to avoid potential safety hazards.
In addition to the secondary maintenance, there are three times and many future maintenance of the vehicle. In addition, there are some regular maintenance of fixed parts, such as the replacement of the timing belt, the replacement of the brake shoe, etc. are very important.
Classification of tablet press: Models can be divided into single punch tablet press, rotary tablet press, sub-high speed rotary tablet press, automatic high speed tablet press and rotary core tablet press.
The sheet shape pressed by the tablet press is initially flat circular, and later developed into shallow circular arc and deep circular arc on both sides, which is for the need of coating. With the development of special-shaped tablet press, oval, triangle, oblong, square, diamond, circular ring tablets followed. In addition, with the continuous development of preparations, due to the requirements of compound preparations and timed release preparations, special tablets such as double layer, triple layer and core coating are made, which need to be completed on special tablet press.
Rotary tablet press is a machine which is made of several pairs of die distributed on the turntable to make a circular lifting movement according to a certain track and press the granular material into tablet through the press wheel. And the stamping rod with the rotary table rotating speed ≥60m/min line press is called high-speed rotary tablet press, this high-speed rotary tablet press has a forced feeding mechanism, the machine is controlled by PLC, has the automatic adjustment of pressure, control the weight of the piece, eliminate the waste piece, print data, display fault shutdown and other functions, in addition to the control of the weight difference within a certain range, Quality problems such as missing Angle and loose lobe can be automatically identified and eliminated.
With the development of market demand, the scope of application of tablet press is more and more wide, no longer simply limited to the suppression of Chinese and Western medicine tablets, more widely suppressed health food, veterinary medicine tablets, chemical tablets: such as mothballs, washing blocks, smurf blocks, art powder, pesticide tablets, food tablets: chicken essence block, isatis root block, divine Qu tea block, compressed biscuits.
Rotary Tablet Press,Tablet Press,Tablet Machine,Tablet Maker,Pill Machine
JIANGYIN CITY XUAN TENG MACHINERY EQUIPMENT CO.,LTD , https://www.xuantengmachine.com