Feeder's sand content in the material fed into the impact crusher

If the feeding end affects the feeding, if the crushing chamber's adherent can not be cleaned in time, it can affect the normal working state of the crusher. Therefore, for the viscosity of the material to take measures to reduce the viscosity or in the crushing crusher cavity design The cleaning device performs the cleaning work. The nature of the production materials includes the hardness of the raw materials of the materials, the composition of the materials, the viscosity of the materials, the moisture content of the materials, the requirements for the granularity and fineness of the products produced, and the like. The higher the hardness of the material to be broken, the greater the difficulty of crushing work, the reduction of the crushing capacity, the slower progress of the crushing work, the longer the time for the raw materials to stay in the equipment, the higher the wear and tear on the equipment, For the first time, the crushing efficiency of materials with lower hardness is higher than that of materials with high hardness, and the yield is also higher. In the crushing production line, if the production materials are indeterminate, we can try to select brittle, medium-hard materials, and it is easy to increase the crushing progress and product output.

The influence of the composition of the material of the feeding machine on the crushing work, the more the sand content and the powder amount in the material fed into the impact crusher, the more easily the feeding machine is attached to the conveying during the material conveying process. The machine normally feeds material, and the material forms a blockage on the conveyor belt. There is no continuous material entering the crushing chamber. The crusher performs empty operation or the supply of materials cannot be evenly continuous. The load of the crusher increases, but the output does not increase. Therefore, to understand the fineness and powder content of raw materials, for the raw materials containing more than one powder, a screening process can be added before the crushing operation to reduce the powdery materials in the material/News/20120812145405450.htm