Introduction of the internal system of artificial climate box
RTOP series of multi-stage programmable artificial climate chamber adopts advanced microcomputer programmable control mode. You can set various parameters of the climate box (including number of segments, temperature, humidity, light intensity, and time) to simulate the natural climate. The side panel of the box is a three-layer hollow glass, which is beautiful in appearance, exquisite in manufacturing process and good in heat preservation performance. Its automatic control by the computer makes this artificial climate box highly sought after, but also become intelligent artificial climate box.
Intelligent artificial climate chamber is an instrument that simulates the natural environment and provides a suitable environment for plant growth. The instrument adopts advanced temperature control system and humidity control system, all adopting domestic leading technology FPID control mode system, making the temperature and humidity control of the instrument reach the perfect standard. Artificial climate chambers are used to germinate plant seeds and provide an environment for plant growth so that an uncontrollable natural environment no longer affects the growth of the crop. This is a great improvement for society. On the one hand, it can shorten the cycle of plant growth. On the other hand, it can also increase crop yields. The most important intelligent climate chamber is the temperature control and humidity control system. The parameters measured by these two systems are in line with international standards and can reach the minimum or the highest standard that can be achieved currently. Compared with the light incubator, it is the largest. The advantage is that it has a humidity control function, and the light incubator can only control the light intensity, temperature and running time. In this way, artificial climate chambers can better simulate the natural environment.
Intelligent Climate Chamber Instrument Temperature System: The temperature system consists of a heater, a compressor unit, a cooling fan, a vertical air duct, a temperature sensor, and a control system. Compressor set adopts highly efficient French Miram MT36 (3 HP) fully enclosed compressors (including imported accessories). The chiller adopts a domestically-made 30m2 high efficiency and low noise cooler. The temperature sensor adopts imported (Ningbo assembly) KL type high precision thermistor, which has high precision and high reliability. The compressor assembly is mounted outdoors with a bracket and covered with a hood. The chiller is installed on the ceiling opposite the door, the inlet of the chiller is connected with the vertical air duct below it, and the air inlet of the vertical air duct is on both sides of the bottom. The heater is installed in the air duct.
Intelligent artificial climate instrument humidity system: Humidity system consists of humidifier, dehumidifier, humidity sensor and control system. The humidifier adopts a high-power industrial ultrasonic humidifier with automatic water adding, automatic demineralized water, and a steam output of 3kg/h. The gas pipeline is connected to the chiller outlet by a PVC pipe of φ110mm. Then evenly blow to the entire room. The humidity transmitter uses a highly accurate capacitive humidity sensor. The dehumidifier consists of a compressor unit-cooler-heater in the temperature system of this solution. When the circulating air in the growth chamber passes through the cooling fan, the humidity in the air is removed, and the temperature is lowered. After heating by the heater, the temperature of the air is raised. Due to proper control, the temperature can be kept constant while dehumidifying.
Stearic Acid Series Stabilizers
Stearic Acid Series Stabilizers,Heat Stabilizer Additives,Pvc Barium Stearate,Pvc Barium Stearate Powder
Jiangsu Greya New Material Technology Co., Ltd. , https://www.greyastabilizer.com