Powder Separator Machine

Typical hard material-----superfine grinding of quartz
 
Superfine classifying ball mill used for grinding of quartz:
The dry and continuous superfine classifying ball mill production line features high production capacity, easy operation, low maintenance, free selection of liner and grinding medium, little pollution to the product, stable operation and quality and controlled particle size distribution. It is very important to optimize and combine ball mill and classifier, and good combination can improve the production efficiency, or else high energy consumption and low efficiency.
Main features of equipment:
Ball mill

1. The equipment fabricated on the Germany technical requirement of the superfine filler.
2. Optimal design to the length to diameter ratio of ball mill, grid plate type smoothly discharge material from the end without block, and shell needs no water cooling.
3. Both the liner and grinding medium can be aluminum or quartz without metal pollutant.
4. Reliable mixture ratio of grinding medium, high filling rate result in high output.
5. Optimal design to match of driver and energy cost lowers energy consumption.
6. Match with classifier in closed operation and negative transportation without dust.

Air classifier;

1. Selectable series of ITC or HTS classifier according to the different particle size.
2. Exact cutting point.
3. The inner of classifier is lined with aluminum plate.
4. Classifying wheel is made of organic friction material or ceramics
5. Adjustable second air improves the classifying efficiency.
6. The finished particle can be give directly without the oversize ones.
7. Optimal design to classifying wheel lower energy consumption.
8. Series or parallel classifiers can meet different product requirement.

Dosing system:

1. Material is fed at controlled rate, even the thickness is changeable
2. Treatment of wear prevention to feeding system .without metal pollution
3. The feeder of classifier matching with dosing system interlocked with discharging system of ball mill, assuring the stability of product and system.
4. Barometric damper equipped with air flow measurement system assure the gas feed rate and speed of classifier.

Electric control system:

1. Both raw material hopper and product hopper are equipped with level indicator, realizing the automatic control for the system.
2. Employ PLC and lamp display panel flow and easy operation.

Environmental protection and noise control

1. Employ membrane filter bag, the industrial dust discharged is less than 20mg/m³
2. Match with efficient silencer, noise from draft fan is less than 80dB(A)
3. All the heavy parts amounted on shock absorber.
4. No wastewater discharge, cooling water used for the bearing house is recycled.

Technological flow sheet
 
Production technology on high grade silicon powder
The powder has been used widely in the fields of aviation, spaceflight and electron, the quality requirements for aluminium ion is strict, in order to maintain its quality, normally, it ground by means of jet mill, and the jet mill offered by us features as below:

1. Precious feed and charge level control, stable operation.
2. Built-in classifying wheel made from zircon-alumina composites can give particle size D50=1.5 micron.
3. The inner of the equipment lined with natural rubber avoiding metal contamination
4. Air seal prevent the finished product from oversize particle.
5. Special design to the nozzle improves the grinding efficiency.

Factory and workshop 
Germany Tech Design processing and Manufacture 
MALVERN3000 mastersizer imported from England 

Patents and Certifications 
Typical hard material-----superfine grinding of quartz
 
Superfine classifying ball mill used for grinding of quartz:
The dry and continuous superfine classifying ball mill production line features high production capacity, easy operation, low maintenance, free selection of liner and grinding medium, little pollution to the product, stable operation and quality and controlled particle size distribution. It is very important to optimize and combine ball mill and classifier, and good combination can improve the production efficiency, or else high energy consumption and low efficiency.
Main features of equipment:
Ball mill

1. The equipment fabricated on the Germany technical requirement of the superfine filler.
2. Optimal design to the length to diameter ratio of ball mill, grid plate type smoothly discharge material from the end without block, and shell needs no water cooling.
3. Both the liner and grinding medium can be aluminum or quartz without metal pollutant.
4. Reliable mixture ratio of grinding medium, high filling rate result in high output.
5. Optimal design to match of driver and energy cost lowers energy consumption.
6. Match with classifier in closed operation and negative transportation without dust.

Air classifier;

1. Selectable series of ITC or HTS classifier according to the different particle size.
2. Exact cutting point.
3. The inner of classifier is lined with aluminum plate.
4. Classifying wheel is made of organic friction material or ceramics
5. Adjustable second air improves the classifying efficiency.
6. The finished particle can be give directly without the oversize ones.
7. Optimal design to classifying wheel lower energy consumption.
8. Series or parallel classifiers can meet different product requirement.

Dosing system:

1. Material is fed at controlled rate, even the thickness is changeable
2. Treatment of wear prevention to feeding system .without metal pollution
3. The feeder of classifier matching with dosing system interlocked with discharging system of ball mill, assuring the stability of product and system.
4. Barometric damper equipped with air flow measurement system assure the gas feed rate and speed of classifier.

Electric control system:

1. Both raw material hopper and product hopper are equipped with level indicator, realizing the automatic control for the system.
2. Employ PLC and lamp display panel flow and easy operation.

Environmental protection and noise control

1. Employ membrane filter bag, the industrial dust discharged is less than 20mg/m³
2. Match with efficient silencer, noise from draft fan is less than 80dB(A)
3. All the heavy parts amounted on shock absorber.
4. No wastewater discharge, cooling water used for the bearing house is recycled.

Technological flow sheet
 
Production technology on high grade silicon powder
The powder has been used widely in the fields of aviation, spaceflight and electron, the quality requirements for aluminium ion is strict, in order to maintain its quality, normally, it ground by means of jet mill, and the jet mill offered by us features as below:

1. Precious feed and charge level control, stable operation.
2. Built-in classifying wheel made from zircon-alumina composites can give particle size D50=1.5 micron.
3. The inner of the equipment lined with natural rubber avoiding metal contamination
4. Air seal prevent the finished product from oversize particle.
5. Special design to the nozzle improves the grinding efficiency.

Factory and workshop 
Germany Tech Design processing and Manufacture 
MALVERN3000 mastersizer imported from England 

Patents and Certifications 

Gantry Flame CNC Cutting Machine

Advantages and features:
Automatic igniting and tempering control, high efficient and quick. Can be linear single, double - sided a molding groove cutting.
Brand: Buluoer intelligent
Other name: Gantry flame plasma CNC cutting machine
Cutting mode: flame cutting, Plasma cutting
Suit material: carbon steel, manganese plate, galvanized plate, stainless steel, copper steel, aluminium plate etc. metal plate materials.
Product describe:
This CNC equipment is aimed at metal plate materials baiting, not only the appearance of atmospheric but also stable operating, high working efficiency, long service life and it can be achieved cutting all kinds of design graphic. Widely used in various machine building industry of metal sheet cutting.
Product features:
Bilateral drive, high transmission accuracy, operating is stability.
Frame aging treatment, stable structure and non-deformation.
Can remote operation, convenient and efficiency, save labour.
Automatic temper control, safety and efficiency.
Full-automatic StarCAM/ FastCAM graphical editing software, simple nesting.
Flame/plasma dual-purpose cutting system, easy to operate and wide application range.
System has self-compensating, automatic positioning, automatic height-adjustment, break-point memory and automatic recovery function.
Cutting size customization, flame plasma sub-cutting options.

Flame plasma CNC cutting machine

Basic Equipment

No.	Name	Distribution	Unit	Quantity	Remark
1	Type specification	BLDH4080	set	1	Beam annealing
2	Drive mode	double-drive	set	2	Panasonic servo
3	Drive reducer	AEVELE	set	2	Taiwan
4	CNC	F2300TB	set	1	Shanghai Jiaoda
5	FASTCAM	Fast CAM Chinese version	set	1	Guoyou
6	Flame cutting torch	Wuxi Xiangzheng	set	1	Guoyou
7	Plasma power	Chengdu Huayuan LGK200	set	1	Huayuan
8	Arc voltage regulator	Shanghai Jiaoda	set	1	system-provided
9	Automatic ignite device	Wuxi Xiangzheng	set	1	Guoyou
10	Precision track	24 kg	m	8*2	Wuxi
11	Precision rack	Straight tooth	m	6*2	Wuxi
12	Pulley	Nylon chain	set	1
13	Lift body	2K2M	piece	2

Technical requriments

No.	Name	Distribution	Remark
1	Width of machine tool	4000
2	Effective cutting wideth	3100
3	Track gauge	3710
4	Idle speed	0~8000 mm
5	Flame cutting thickness	5~200 mm
6	Plasma punch cutting thickness	25mm	user demand
	Plasma max. Cutting thickness	45mm	user demand
7	Effective length	6500 mm
8	Cutting torch journey	≤150 mm
9	Accurancy	± 0.5 mm
10	Track length	8m
11	Input power	AC220V/380V 50HZ
12	automatic height-adjustment	Jiaoda arc voltage height-adjustment
13	Cutting material	Stainless steel plate, carbon steel plate

Cutting samples

Flame Cutting Machine,Plasma Cutting Equipment,Copper Cnc Cutting Machine,Cnc Plasma Slab Cutting Machine

Shandong Buluoer Intelligent Technology Co., Ltd. , https://www.buluoermachine.com