Auto Chain Link Fence Machine with Double Spiral

Model NO.: JIAKE 25-80
Voltage: Customized as Your Request.
Weight: 4.2t
Alarm Develectronicsice: Mitsubishi/ Siemens/Schneider
Application: Making Fence for Playgrounds,Gardens,Highways
Trademark: JIAKE
Specification: 6700*1430*1800mm
Origin: China
Auto Chain Link Fence Machine With Double Spiral

Auto Chain Link Fence Machine with Double Spiral

These chain link fence machine is usually making fences for playground and gardens, highway, railway, airport, port, etc.
Machine Description
1 The mold makes two wires become diamond-shape. then diamond-shape wire connects with wire inside the winding shaft.
2 The sides of mesh can be twisted or knuckled.
3 Width and mesh aperture can be customized.
4 Raw material can be Galvanized wire, PVC Coated wire, etc.
5 Making fences for playground and gardens, highway, railway, airport, port, etc.
6 Mold can feed two wire once; so the production is increased
Advantage
1. Taiwan Delta Servo motor 5.5kw +Planetary Reducer (rate 1:3);
2. Original Japan Mitsubishi PLC + Touchable screen;
3. Alarm device + Emergency button;
4. Single mold, double spiral;
5. 12-procedure processed Straightening wheels;
6. Automatic mesh roller;
7. Three ways of mesh sides
8. Schneider Low-Voltage electronics;
9. Customized voltage: 220V, 380V, 440V, etc.
Technical parameter
Mesh opening 25-80mm
Max weaving length 20m,as you requested
Max. weaving width 4m
Wire Diameter 2-4mm
Raw material Galvanized wire, PVC Coated wire, etc.
Production capacity 120-180 square meters per hour
Control system PLC automatic controller
Servo Motor 5.5 KW
Motor for parting tool 1.5 KW
Motor for winding 0.75 KW
Motor for side dealing 1.5 KW
Side making Knuckled and twisted,  both knuckled, both twisted
Electric system 1.Japan Mitsubishi PLC origin
2. Delta Servo motor
3. French Schneider (Low-voltage electrical system)
4. French Schneider or Chinese famous brand Electronics
Size Main machine: 6700*1430*1800mm
              5100*1700*1250mm
Machine Life More than 12 years
Weight 4.2T
Load
Auto Chain Link Fence Machine with Double Spiral


Certificate
Auto Chain Link Fence Machine with Double Spiral


Factory
Auto Chain Link Fence Machine with Double Spiral


Hebei Jiake Welding Co ltd have an experience on designing and manufacturing wire mesh machine for more than 10 years.Our double spiral chain link fence machines have exported to more than 90 countries and regions over the world.Welcome to visit our factory and have more deeply cooperation..
Service
Auto Chain Link Fence Machine with Double Spiral


Contact us



Auto Chain Link Fence Machine with Double Spiral
 

Galvanized Steel Sheet

Galvanized Steel Sheet & Plates, are intended for use where greater corrosion protection is required without painting. A lower cost alternative to stainless steel, galvanized sheet and plates have a rust free protection for up to 30 years, while maintaining strength with a durable surface coating. Our company stocks many sizes in precut sizes, full mill sizes or we can hot dip virtually any size and quantity required for your welding or construction project.

Galvanized steel Sheet coil has a light weight, beautiful and good anti-corrosion performance, can be directly processed. Is mainly used in construction, shipbuilding, automobile manufacturing, machinery manufacturing, furniture home appliance industry, electrical and automation industry. Efficient construction, save energy and protectenvironment, prevent pollution etc.

Hot-dip Galvanized Steel Sheet
Hot-dip galvanized sheet is made by immersing the steel sheet in a molten zinc bath at about 500 °C to attach a zinc layer to the surface. This is the continuous galvanizing process. It will form a protective zinc layer on the surface so that it has good paint adhesion and weldability. It is the most widely used and cost-effective method to prolong the service life of steel sheets.
Electro-galvanized Steel Sheet
Electro-galvanizing, also known as cold galvanizing, uses electrolysis to form a uniform and dense layer on the surface of the metal. The anti-corrosion zinc layer can protect steel parts from oxidation corrosion. Also, it can meet decorative purposes. But the zinc layer of the electro-galvanizing steel sheet is only 5-30 g/m2. So its corrosion resistance is not as good as hot-dip galvanized sheets.

Galvanized Sheet,Galvanised Corrugated Steel Sheet,Galvanised Steel Coil

Tianjin Youfa Steel Co., Ltd , https://www.youfametal.com