Â

1. Factory Making Vegetable Washer And Dryer With Steam Heating Description:Â
1. CTC series hot air circulating drying oven is made by a low noise, high temperature axial flow fan and automatic temeprature control system.Â
Â
2. Food dryer/ dehydrator machine
The whole circulation system is fully enclosed to make that the heat efficiency of the drying oven increases from 3-7%of the traditional drying oven to 35-45% of the present one. The highest heat efficiency can reach to 50%.
Â
3. Industry Cabinet Dryer ::
- For the heating source, there are many kinds: steam, electrical, far infrared or steam and electrical to be chosen.
- The used temperatures to be used: steam heating 50-140°C, Max.150°C.
- The moisture while using the electrical or temperature: 50-350°C.
- There are the automatic control system and the computer control system for users' selection.
- Commonly used steam pressure 0.02-0.08 Mpa(0.2-8kg/cm2)
- If using the electrical heating and being type one, the calculation is 15kw, and the practical use is 5-8kw/h.
- The special requirements should be indicated at the time of order.
- The price for the non-standard oven should be consulted.
- The use temperatures more than 140°C and less than 60°C should be indicated at the time of order.
Such as vegetables, fruits,fishes,medicines, Chinese herbs, particles, granules, packing bottle, pigment dyes, sausages, plastic resins, and baking finish etc.
Â
Fruit :Â Â Â Â Â apple, pineapple, mango, kiwi, lemon, cherry, berry, gogi, fig etc
Vegetables:Â Â Â Â Â carrot, potato, ginger, pepper, tomato, cabbage, chilli, garlic, onion, mushroom etc
Meat :Â Â Â Â Â fish, seafood, pork, lamb, chicken, etc
Herbs:Â Â Â Â Â Leaves ,moringa leaf ,tea
Nuts:Â Â Â Â Â Â cashew nuts, walnuts, peanuts,
Beans:Â Â Â Â Â Cocoa Beans, pea,
Flowers :Â Â Â Â Rose etc
Plants and so on
2. Factory Making Vegetable Washer And Dryer With Steam Heating Specification:
Â
Model | CT-C-O | CT-C-IA | CT-C-I | CT-C-II | CT-C-III | CT-C-IV |
Capacity of each batch | 25kg | 60kg | 120kg | 240kg | 360kg | 480kg |
Power of Fan | 0.45kw | 0.45kw | 0.45kw | 0.9kw | 1.35kw | 1.8kw |
Consumption of steam | 5kg/h | 10kg/h | 18kg/h | 36kg/h  | 54kg/h | 72kg/h |
Total Power | 9kw/h | 9kw/h | 15kw/h | 30kw/h | 45kw/h | 60kw/h |
Thermal area | 5m2 | 10m2 | 20m2 | 40m2 | 80m2 | 100m2 |
Air volume | 3450m3/h | 3450m3/h | 3450m3/h | 6900m3/h | 10350m3/h | 13800m3/h |
Temperature used | ±2°C | ±2°C | ±2°C | ±2°C | ±2°C | ±2°C |
Quantity of trays(pcs) | 16 | 24 | 48 | 96 | 144 | 192 |
The size of tray(mm) | 460x640x45 mm | |||||
Outside dimension (mm) | 1850x1000x2044 | 1700x1200x2000 | 2600x1200x2000 | 2600x2200x2000 | 3600x2200x2000 | 4760x2200x2290 |
Inside dimension(mm) | 1050x800x1500 | 900x1000x1500 | 1800x1000x1500 | 1800x2000x1500 | 2700x2000x1500 | 3600x2000x1500 |
Baking vehicles | 0 | 1 | 2 | 4 | 6 | 8 |
3. Factory Making Vegetable Washer And Dryer With Steam Heating More Photos :


Â


Final Dried Product Photo As Below :

Â
Cell/ 0086-15178920906Â
Â
What is a windshield Wiper Transmission Linkage and where is it located?
The windshield wiper transmission is an integral component of your vehicle`s windshield wiper system. It is a mechanical device made up of multiple linkages that connect the Wiper Motor to the two wiper arms, transferring the power generated from the rotational movement of the motor when it is activated by the wiper controls into the sweeping back and forth motion of the windshield wiper arms which the blades that clean the windshield are attached to. The wiper transmission helps the wiper motor and arms work together without having to hit each other. The multiple sections of linkage are joined and held together by rivets, while bushings are mounted to the Wiper Linkage arms and act similarly to bearings. Together, they make it possible for the different sections of the wiper linkage assembly to rotate and pivot.
On most vehicles, the wiper linkage assembly is located under the cowl at the base of the windshield and hidden out of view. This protects the mechanism from being exposed to outside elements and allows for it to operate quietly when being used.
How do I know if my windshield wiper transmission needs to be replaced?
Windshield wiper transmissions are the most common failed parts of the wiper system and can require replacement for multiple reasons. A Windshield Wiper Linkage assembly will make an annoying clunking or squeaking sound when they wear out from prolonged use over time. Turning on frozen wiper blades without properly loosening them from an icy windshield during the cold winter season is a notorious and common cause of damage to wiper systems; this forces the wiper motor to put excess stress on the wiper linkages and arms. This stress can cause plastic connectors to break, pivot points to elongate, and knurled wiper studs to round off. Heavy snow and ice can also force the wiper motor to put excess stress on the linkages and wiper arms, as can large amounts of dirt, causing a similar outcome.
A broken or damaged windshield wiper linkage assembly can cause the wipers to not work or work incompletely, which can be quite hazardous for you and other drivers around you. Therefore, if your wiper transmission has failed, obtaining a replacement and installing it quickly is highly recommended.
To Shave Wiper Linkage,Fiat Stilo Wiper Linkage,Broken Windshield Wiper Linkage,Front Windshield Wiper Linkage
COMOTECH ASIA PACIFIC (HANGZHOU)CO.,LTD , https://www.capwiper.com