Material Tensile Testing Equipment with TUV Ce Certicate (YL-S70)

Model NO.: YL-S70
Loading Method: Dynamic Load
Display: Computer Display Mode
Control: Computer Control
Weight: 0-100Kg
Power Source: AC220V
Oil Cylinder Position: None
Net Weight: 45kg
Test Distance: 450mm
Capacity Selection: 10n,20n,50n,100n,200n,500n,1kn,2kn,5kn
Force Unit Conversion: N,Kn,GF,Kgf,Lbf,Kp,TF(Si),TF(Long)etc.
Length Unit: mm,Cm,Inch,M,Km,Um etc.
Stroke Resolution: 1/500,000mm
Force Resolution: 1/500,000
Machine Accuracy: Better Than 0.5
Motor: Servo Motor Drive
Standard Config.: USB 232 Line, Software
Trademark: Yuelian
Transport Package: Export Standard Plywood Box
Specification: size(L*W*H mm): 510*590*1061
Origin: China
HS Code: 9031809000
Material Tensile Testing Instruments With TUV CE Certicate (YL-S70)
Material Tensile Testing Equipment with TUV Ce Certicate (YL-S70)

1. Introduction


This tester is designed for conduct tensile, compression,  bending,  shearing, bonding strength,  peeling, tearing and other tests for rubber, plastic, leather, metal, nylon line, fabric, paper, aviation, packaging, construction, petrifaction, electrician, vehicle and other materials.  It is a basic equipment of quality control, receiving inspection, physical  test, mechanics research, material  development.

2.Detail graph

Material Tensile Testing Equipment with TUV Ce Certicate (YL-S70)

3.Machine structure:
1>.AC servo motor drive, precision ball screw drive
2>.Screw shield using aluminum  extrusion, surface blasting, anode satin handle, exquisite
3>.Shell selection of advanced electrostatic spray treatment, durable
4>.Vertical stroke trim switch
5>.Quick release connectors, you can  easily switch to a different function fixtures
6>.Machine protection: over-travel, over capacity protection, emergency brake switch

Material Tensile Testing Equipment with TUV Ce Certicate (YL-S70)


4.Machine function

1>. Powerful data analysis and statistical curves graphical analysis aids, with zoom, pan, crosshairs, and take other functions.
2>.  Several historical test data can be transferred to the graphics displayed simultaneously comparative analysis done.
3>. Up to 7 interval setting, 40 manual taking points,  120 automatic pick point function. With the maximum, minimum, average, to the level of the average, median, standard deviation, population standard deviation, CPK values and other statistics.
4>. Test curve shows: during the test in real time and can be a show of force at the  same time - displacement, force - time, displacement - time, stress - strain curve, can easily switch to the screen to see the curve.
5>.  Custom test methods: with the speed, position shift,  given the strength, will power rates, given stress, stress rate constant, constant strain, strain rate and other fixed control mode, enabling complex multi-step control can be nested loop. set automatic return, automatic judgment fracture, auto-zero function.
6>. Positive and negative force sensor can be switched.

5.Specification
Mode YL-S70 YL-S71 YL-S72 YL-S73
Machine size(W*D*H)(mm)  510×590×1061 510×590×1325 510×590×1530 510×590×1880
Net weight 45KG 50KG 55KG 70KG
Test Distance 450mm 700mm 1000mm 1300mm
Capacity selection 10N,20N,50N,100N,200N,500N,1KN,2KN,5KN(Optional dual capacity, with rapid replacement 
requirements)
Stop mode Overload shutdown, emergency stop button, specimen failure automatically shut down, the upper 
and lower limits set automatically shut down
control method Full computer control, powerful software
Force unit conversion N,kN,gf,kgf,lbf,kP,tf(SI),tf(long)etc.
Length unit mm,cm,Inch,m,km,um etc.
Stress unit Pa,Kpa,Mpa,Gpa,KN/,N/ etc.
Force resolution 1/500,000
Machine accuracy Better than 0.5
Stroke resolution 1/500,000mm
Acquisition rate 50 time/S
Speed range 0.01~500mm/min(can specify)
Test Distance Ø140mm
motor Servo motor drive
power 400W
volt supply 220V 50~60HZ
standard config. USB 232 line, software
option Two-point extension meter, fixture

6.Tensile Testing Report
Material Tensile Testing Equipment with TUV Ce Certicate (YL-S70)
Material Tensile Testing Equipment with TUV Ce Certicate (YL-S70)
Material Tensile Testing Equipment with TUV Ce Certicate (YL-S70)


 

Trolleying Mechanism and Spare Parts

A Tower Crane trolley is a component of a tower crane that moves horizontally along the jib of the crane. It is a wheeled device that is attached to the jib and is used to move the load from one location to another. The trolley is controlled by the operator using a remote control or a cabin located on the crane. The trolley is an essential component of the tower crane as it allows the operator to move the load precisely and safely. It is designed to withstand the weight of the load and the forces generated during the lifting process.

We supply all kinds of high quality and good price trolleying mechanism and spare parts. As one of the leading tower crane and spare parts suppliers, we provide Tower Crane Trolley, Tower Crane Trolleying Motor, Crane Trolley Mechanism, Trolleying Fan, as well as Slewing Mechanism and Spare Parts, Hoisting Mechanism And Spare Parts etc.

A tower crane trolley consists of a car that moves along the jib through some lanes. This movement gives the necessary maneuverability in the tower crane. It is metallic so that it supports the weight to be lifted.

Crane Trolley Mechanism,Tower Crane Trolley Motor,Trolleying Mechanism,Tower Crane Trolleying Motor,Tower Crane Trolley,Trolleying Fan

SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.syconstructionhoist.com