Problems to be aware of during double-head milling operation:
1. The operator must stick to the post, carefully operate, and do not do anything unrelated to work. Stop when you leave the machine and turn off the power and air supply.
2. Processing according to the process regulations. It is not allowed to increase the amount of feed, the amount of grinding and the cutting speed. It is not allowed to use the machine tool for over-standard, overload and overweight. It is not allowed to use coarse machine and large machine.
3. The tool and workpiece should be correctly clamped and fastened. Do not touch the machine when loading or unloading. Find a positive tool and the workpiece is not allowed to hit with a heavy hammer. It is not allowed to tighten the tool and workpiece by increasing the torque by lengthening the handle.
4. Do not install thimbles, knives, knife sleeves, etc. in the taper hole of the double-head milling machine, the taper hole of the tailstock sleeve and other tool mounting holes, which are inconsistent with the taper or the hole diameter, the surface is notched and not clean.
5. The mechanical shifting of the double-head milling machine drive and feed mechanism, the clamping and adjustment of the tool and the workpiece, and the manual measurement between the workpieces should be stopped at the cutting and grinding, and the tool and the grinding tool should be stopped after leaving the workpiece. get on.
6. The sharpness of the tool and the grinding tool should be kept. If it becomes dull or cracked, it should be sharpened or replaced in time.
7. In the cutting and grinding of double-head milling machines, the cutters and grinding tools do not leave the workpiece and are not allowed to stop.
8. It is not allowed to dismantle the safety protection device on the machine tool. The machine tool lacking the safety protection device is not allowed to work.
9, the hydraulic system in addition to throttling and other hydraulic cutting is not allowed to adjust privately.
10. On the machine tool, especially the rail surface and the work surface, it is not allowed to directly place tools, workpieces and other debris.
Leisuwash specializing in manufacture Automatic Car Wash Machine, Touchless Car Wash , Automatic Touchless Car Wash, touchless car wash equipment, robot car wash, smart car wash system, leisuwash 360, leisuwash leibao 360, laserwash 360, leisuwash touchless car wash machine, leisu wash touchless car wash automatic, leisu wash 360 high pressure touchless car wash equipment, robo car wash, touch free car wash, leisuwash 360 touch free car wash, leisuwash 360 price, automatic car wash price, leisuwash in malaysia, no touch automatic car wash machine, leisuwash 360 mini, leisuwash SG fully automatic car wash equipment.
Leisuwash S90 touchless car wash machine high intelligent high quality, with car wash + car care + drying process totally, each car wash takes time 1 minute to 5 minutes which depends on the car wash mode.
Leisuwash S90 Car Wash Machine is an entry level car wash unit, but you won`t find any low grade components and no cost cutting on the expense of quality. Each Leisuwash S90 is built by Leisuwash employees in accordance with our usual quality standards, the low price is achieved by high standardization and the use of proven technology. The Leisuwash S90 is for clients that need a wash machine at a competitive price with higher ROI.
Automatic Car Wash Equipment,Leisuwash S90 Drying,Automatic Leisuwash S90 Drying Car Wash Machine,Leisuwash S90 Drying Car Wash Machine
Hangzhou Leisu Cleaning Equipment Co.,Ltd , https://www.sdleisuwashtouchless.com