According to reports, the local standard for the fifth phase of "Car Gasoline" and "Car Diesel" in Beijing will be officially implemented on May 31. According to the change of gasoline octane number, the gasoline grade will be adjusted from No. 90, No. 93 and No. 97 to No. 89, No. 92 and No. 95 respectively. The oil price has remained unchanged for the time being.
The Beijing Municipal Environmental Protection Bureau released the above information on the 17th. According to reports, the adjusted standards are generally stricter than the national fifth-phase vehicle oil recommendations, and are basically in line with European standards at the same stage.
Li Kunsheng, director of the Motor Vehicle Emissions Management Office of the Beijing Municipal Environmental Protection Bureau, said that the most important change in the two local standards for the fifth stage of automotive gasoline and diesel compared with the fourth stage standard is that the sulfur content limit is reduced by 50 mg per kilogram. For 10 mg per kg, the manganese content limit is reduced from 0.006 g per liter to 0.002 g per liter. “Sulfur content is an indicative environmental indicator for vehicle fuel standards. The sulfur content of Beijing V is exactly the same as the sulfur content limit of Euro V.â€
“The sulfur content of the oil is greatly reduced, which will further reduce the toxic effect of the sulfide on the purifier, and the conversion capacity of the purifier can be improved to achieve emission reduction.†Li Kunsheng said that the current emissions of nitrogen oxides and volatile organic compounds from motor vehicles in Beijing The contribution rate of PM2.5 to air pollution reached 58%, 40% and 22.2% respectively. The upgrade of gasoline and diesel quality of vehicles will contribute a lot to emission reduction.
The China Automotive Technology and Research Center has shown that the use of gasoline vehicles in the fifth phase of oil use emissions reduction of 15%. More than 5 million vehicles in Beijing use all the fifth-stage oil products. The emission reduction effects of nitrogen oxides, carbon monoxide and hydrocarbons will be very impressive, and PM2.5 will be cut simultaneously.
According to reports, according to the experimental research of authoritative testing institutions, the standard No. 89, No. 92 and No. 95 motor gasoline are suitable for vehicles that used the No. 90, No. 93 and No. 97 motor gasoline. Before June 15, the Beijing city gas station should Complete the replacement of the new standard oil brand number. Experts suggest that vehicles using No. 95 gasoline in Beijing use No. 97 gasoline outside Beijing, and vehicles using No. 92 gasoline use No. 93 gasoline outside Beijing.
Regarding the price of new standard oil products that the people care about, Li Kunsheng said that the adjustment of oil prices should be in accordance with the procedures, and the relevant enterprises should apply to the development and reform department. Before adjusting the oil standard, it is generally first to supply the new standard oil, and then adjust the price after half a year. At present, the environmental protection department has recommended to the relevant departments that the oil price will not be changed for the time being. To be sure, the price will not be adjusted when the new standard oil is listed on May 31.
Fan Yaoguang, director of the Important Commodity Market Management Branch of the Beijing Municipal Administration for Industry and Commerce, said that from May 31 to July 31, the new oil replacement period will start. From August 1st, the industrial and commercial department will increase the frequency of inspection and inspection of refined oil products in the circulation field. It is strictly forbidden to produce, import or sell motor fuel that does not meet the requirements of the new standard.
It is reported that the Beijing Municipal Environmental Protection Department is reporting the vehicle emission standards of the Beijing V phase according to the procedures, and will be officially announced in September at the earliest.
Liquid Cooling Plate Heat Sink
Liquid Cooling Plate Heat Sink is a high-performance heat sink that uses liquid cooling technology to dissipate heat generated by electronic devices. It is designed to be used in applications where air cooling is insufficient or impractical. The heat sink is made up of a series of channels that are filled with liquid coolant. The coolant flows through the channels, absorbing heat from the electronic device and carrying it away from the heat sink.The liquid cooling plate heat sink is typically made of materials such as copper or aluminum, which have high thermal conductivity. The channels are designed to maximize the surface area of the heat sink, allowing for efficient heat transfer. The liquid coolant used in the heat sink can be water, glycol, or other specialized fluids that are optimized for heat transfer.One of the main advantages of liquid cooling plate heat sinks is their ability to dissipate large amounts of heat in a small space. This makes them ideal for use in high-power applications such as computer processors, power electronics, and LED lighting. They are also ideal for use in applications where noise and vibration must be minimized, as liquid cooling is much quieter than traditional air cooling methods.
Overall, liquid cooling plate heat sinks are a highly efficient and effective way to dissipate heat in electronic devices. They offer superior performance compared to traditional air cooling methods and are ideal for use in high-power and noise-sensitive applications.
Liquid Cooling Plate Heat Sink,Liquid Cooling Plate Radiator,Cooling Plate Aluminum Heat Sink,Aluminum Liquid Heat Sink
Suzhou Remgar Metal Manufacturer Co.,Ltd. , https://www.remgaral.com