China's three new cars to register before the end of May, otherwise not on the card
Starting from April, all license plates for light diesel and heavy gasoline in Nanjing must comply with the National IV standard. The reporter learned from the city's motor vehicle exhaust monitoring center that there are still some unlicensed new cars on the market or the National 3 standards. The center reminds that before May 31, the national standard light diesel and heavy gasoline new cars will not be registered as required. For the record, you will not be able to apply for a licence.
60% reduction of new standard pollutants
It is reported that the motor vehicles that increase the environmental protection registration threshold are diesel vehicles with a maximum total mass of no more than 3,500 kilograms and gasoline vehicles with a maximum total mass of more than 3,500 kilograms. As early as 2011, Nanjing implemented the National IV standard for light-duty gasoline vehicles. This is the second time to increase the environmental protection registration threshold for new vehicles. Compared with the three national standards, the emission of exhaust pollutants from the State Fourth Automobile is less. Vehicle emissions include HC (hydrocarbons), NOx (nitrogen oxides), CO (carbon monoxide), and PM (particulate matter). After the implementation of the national standard, the emission of these pollutants can be reduced compared with the national standard. 60%, in layman's terms, the moving vehicle no longer has a "black tail."
Reserve a two-month transition period for the owner
After the implementation of the national standard, new cars that do not meet the standards will not be able to apply for a license. In addition to the implementation of the National IV standard for the registration of new cars, the second-hand car that has been transferred to Nanjing in the field must also implement the National IV standard. In addition, foreign companies that have come to study abroad, court decisions, and light-chai heavy-duty vehicles that are not up to the national standard for purposes such as debt repayment or donation cannot transfer their households to Nanjing.
The environmental protection standard was increased, and the environmental protection department reserved a two-month transition period for the owner, that is, the owner who has signed the contract has not yet obtained the car. If the buyer is a national standard car, he only needs to visit the city before May 31st. Motor vehicle exhaust monitoring center registration and registration can still be on the card. The National III emission vehicles that are stocked by vendors also comply with such registration and filing procedures.
At present, only 110 vehicles and three new cars are registered
Yesterday, the reporter learned from the center that up to now, there are only 110 new national standard cars registered and registered at the center, all of which are light diesel vehicles. According to the staff of the center, the new cars for gasoline vehicles sold in Nanjing have all reached the national standard. It is reported that the Nanjing diesel vehicle is the first implementation of the National IV standard, and the next step will be to implement the National IV standard for heavy-duty diesel vehicles.
The environmental protection department introduced that, in addition to the new vehicle registration standards, China’s second- and third-tier vehicles are gradually withdrawn from the market, and Nanjing has implemented strict exhaust gas testing at the same time as in-use motor vehicles. Yellow-label vehicles and non-standard vehicles that do not meet emission standards are eliminated. And by way of restrictions, through these methods, the impact of vehicle exhaust emissions on the air environment will be reduced.
Terry Towel Warp Knitting Machine
Terry Towel Warp Knitting Machine is a highly-speed warp knitting machine, which running speed could up to 1,300RPM. Thanks to advanced technology and carbon fiber material widely used, warp knitting terry towel machine becomes more stable and higher productive compared with other terry machines.
A-ZEN TS4-C terry towel warp knitting machines, which also be called KS4FBZ, is equipped with Germany Needles, Carbon-fiber Needle bed and bars, laser-stops device as well as other market-tested spare parts, because of which A-ZEN terry towel machines gain a market acceptance since last 4 years.
Piles of warp knitting terry could reach to 6mm while back side of terry could be 3-4mm. The weight of warp knitting terry usually from 200-400gsm. Microfiber Polyester, Polyamaid and cotton yarn are available in warp knitting terry machine.
Technical Data:
Working Width/Gauge: 186"/ E24;
Working Speed: 50-1300rpm (Depends on yarn and designs);
Pattern Drive System: Pattern Disc or EL Drive (Optional);
Yarn Let-off Device: Electronical Yarn Let-off System;
Fabric Take-up: Electronical Fabric Take-up System;
Batching Device: Electronical Batching Device;
Laser Stops Detector;
Individual Terry Pile Brushing Device;
Online Service Supported.
Details please check machine leaflet.
Terry Towel Warp knitting machine,Terry machine,Microfiber towel machine
CHANGZHOU A-ZEN TEXTILE TECHNOLOGY CO.,LTD , https://www.barmachinery.com