How the side mounted compression garbage truck works
The side-mounted compression type garbage truck is used to lift the trash can automatically into the garbage through the rod, and push the garbage behind the carriage to achieve the purpose of compressing the garbage. The compression principle is the use of mechanical, electrical, hydraulic linkage control system, computer control and manual operation In the system, garbage is poured in by means of fillers, push shovels, etc., crushing or flattening, and the waste is squeezed into the carriage and compacted and evacuated. Its characteristics are: large compression ratio, high load: the maximum crushing pressure is 12 tons, and the loading capacity is equivalent to two and a half times that of the same-ton non-compressed garbage.
Comparison of side-mounted compression garbage trucks and rear-mounted compression garbage trucks
The biggest difference between the side-mounted compression type garbage truck and the rear-mounted compression type garbage truck is the loading method. The former is a side-mounted device. The trolley can be automatically dumped into the trash by pulling the rod, and the garbage can be pushed to the rear of the compartment to achieve the purpose of compressing the garbage. The latter is loaded into the rubbish from the back through direct loading or manual input, and pushes out rubbish in front of the car to achieve the purpose of compression.
The unloading methods of the two compression garbage trucks are the same, and they are all achieved through the pushing disk in the compression box. The garbage in the roadside trash bin can be collected into the garbage bin, and the garbage truck can be compressed into a block transport by a post compression device, which saves the garbage volume, speeds up the efficiency, and eliminates secondary pollution.
Side compression type garbage truck use
1. Automatically feed the trash cans of different specifications into the compartment
2, the car roof door automatic drive opening and closing;
3, the rear door automatic rotation drive opening and closing;
4. The pushing board in the compartment can squeeze the garbage and increase the load of garbage;
5. Cars are lifted in parallel and can be docked with various types of compression trucks. The rubbish in the carriage is pushed into the compression mechanism of the compression car for compression, avoiding secondary pollution in the trans-shipment process. Hubei Jiangnan Special Purpose Vehicle Co., Ltd. produces Garbage trucks, according to different functions, are: Swing arm type garbage truck: It is composed of a chassis, a trash can (bucket), a swing arm deceleration buffer cylinder, and the like. Its characteristic is that the bin can be separated from the body to achieve a vehicle and more. Combined use of trash bins. Hanging bucket type self loading and unloading garbage truck: adopt chain and hydraulic cylinder linkage device to realize half lifting and turning over garbage, and automatically collect garbage from multiple garbage bins into the carriage and can be dumped.
Compression garbage truck: adopts mechanical, electrical and hydraulic linkage control systems, computer control and manual operating systems, and implements garbage dumping, crushing or flattening by means of fillers, push shovels, etc., and squeezes garbage into the carriage and presses it. Real and evasive. Removable garbage truck: It is widely used in city streets and school garbage disposal. It can be equipped with multiple garbage buckets in one year, multiple garbage buckets placed in each garbage point, with self-unloading function, hydraulic operation, and dumping garbage. Sealed self-dumping garbage truck: widely used in urban street garbage disposal, all with sealed dumping function, hydraulic operation, easy dumping of garbage.
Hubei Chusheng Special Purpose Vehicle Co., Ltd. is a professional manufacturer of various types of special-purpose vehicles. It has many years of experience in the production of special-purpose vehicles, and has reliable quality and high performance-to-price ratio. It ranks first in sales in the same industry. The after-sales service promises to refit part of the three-packs for one year or 10,000 kilometers, allowing you to buy the rest assured and use the rest assured.
Self Cleaning Filter,Self Filter,Backwash Strainer,Auto Self Cleaning Filter
ANPING HANKE FILTER TECHNOLOGY CO , https://www.anpinghankefilter.com