- Model NO.: customize
- Automation: Automatic
- Size: Customize
- Nitrided Layer Depth: 0.5-0.8mm
- Bimetallic Layer Depth: 3mm
- Trademark: ZHONGYANG
- Origin: China
- Screw: Twin-Screw
- Computerized: Computerized
- Material: Nitriding Steel
- Nitrided Hardness: HRC56-58
- Bimetallic Layer Hardness: HRC58-62
- Specification: ISO 9001: 2008 approved
- HS Code: 84779000
Diameter: Φ 45mm-Φ 200mm
L/D ratio: 16-35
High quality 38CrMoAla material
Nitration surface treating
The compression ratio of screws can be designed according to different products and ingredients
Base Materials:
(1)38CrMoAlA(JIS SACM645)
(2)42CrMo(AISI 4140)
(3)4Cr5MoSi V1 (JIS SKD-61)
(4)9Cr18MOV
(5)HPT
Bimetallic alloy materials:
1)Fe-based alloy
2)Ni-based alloy/Deloro alloy
3)Co-based alloy
4)NiCo-based alloy
5)Tungsten carbide/Wolfram carbide
Technics:
Heat treatment
High-frequency quenching
Nitriding treatment
Hard-chrome electroplating
Bimetallic alloy welding
Bimetallic alloy centrifugal casting
Technical parameter:
Nitrided layer depth: 0.5-0.8mm
Nitrided hardness: 900-1000HV
Nitrided brittleness: Less than grade 1
Surface roughness: Ra0.4
Linearity of screw: 0.015mm
Hard-chrome plating hardness after nitriding: ≥ 950HV
Chrome-plating layer depth: 0.025-0.085mm
Bimetallic layer depth: 3mm
Warranty and service: 1 year.
Focus on quality and service.
Experienced manufacturer, we will be the best choice.
Bitumen Heating Storage Equipment
Asphalt heating storage equipment is an important road construction equipment, mainly used to heat and store asphalt in order to carry out road construction and maintenance when needed. The equipment has the characteristics of high efficiency, safety and environmental protection, and can provide stable asphalt supply for road construction.
Asphalt heating storage equipment is mainly composed of heating device, storage tank and control system. The heating unit uses oil or gas burners to transfer heat to the asphalt to heat it to the proper temperature. Storage tanks are large containers used to store heated asphalt, generally made of high-temperature resistant materials. The control system is responsible for monitoring the operating status of the equipment and the temperature of the asphalt to ensure the safe and stable operation of the equipment.
The heating principle of asphalt heating storage equipment is to transfer heat to asphalt through thermal conduction, so that it is heated. Heating devices are generally divided into direct heating and indirect heating in two ways. Direct heating is the use of the burner directly into the storage tank, hot air through the contact of hot air with the asphalt to heat it. Indirect heating is the use of heat exchangers to heat the asphalt in the storage tank without direct contact with the air. The two heating methods have advantages and disadvantages, and need to be selected according to the actual situation.
Asphalt heating storage equipment heating speed, can quickly heat asphalt to the use of temperature, improve production efficiency. At the same time, the equipment also has environmental protection characteristics, reducing exhaust gas and smoke emissions, reducing the impact on the environment. In addition, the operation of asphalt heating storage equipment is simple and easy to maintain, which can meet the needs of various road construction and maintenance projects.
In short, asphalt heating storage equipment is an important road construction equipment, with high efficiency, safety, environmental protection and other characteristics. It can provide a stable supply of asphalt for road construction, improve construction efficiency, reduce the impact on the environment and waste of resources. The equipment has a wide application prospect in the field of road construction.
Bitumen Heating Storage Equipment,Bitumen Tank Container,Gas Thermal Oil Heater,Asphalt Storage Tank Equipment
BituRock Science & Technology (Jiangsu) CO., LTD , https://www.biturockequipment.com