Dx Trapezoidal Roof Roll Bending Machine

DX trapezoidal roof roll bending machine
A. Parametets
(1) Equipped with a motor-drive device
(2) Easily and conveniently to operate: Adjustable radian
(3) Overall dimension(mm): 3000*1520*1600mm
(4) Weight(kg): 1200kg
(5) Capacity(kw): 3W
(6) Thickness(mm): 0.25-0.8mm.
(7) Speed: 2 m/min
(8) PLC automatic computer control system. We can adjust cilcular radian by PLC control pressing steps.

B. Consist of:
(1)Main curving part
(2)PLC computer part
(3)Hydraulic pump station

C. Special design available
(1)Send me your exact panel drawing by e-mail
(2)Post me exact panel profile for curving by DHL, EMS or others.

D. Two kinds of power kind=Two kind of speed choose
(1)You can choose electric motor drive:
Forming speed: 2m/min
(2)Or you can choose hydraulic moter drive,
Fast forming speed: 2-4m/min

E. Welcome to visit our factory.
(if you are in China now, we can pick you up if near. Welcome to our factory very much)
Cangzhou Dixin Roll Forming Machine Co., Ltd
ADD: Fuzhuang development, city botou, Privince Hebei Cangzhou, China
Near Capital Beijing

F. How to get our factory

If you are at guangzhou fair
First Stop Guangzhou Station, then Cangzhou
1 Guangzhou Airport to Beijing Airport
About 3 hours. 700 RMB
2 Beijing Airport to Beijing Nan Station
Take a taxt directly to Beijing Nan Railway Station
Or you can choose to take a subway!
3 Beijing Nan Station to Cangzhou West Station
About 50 minutes. 95 RMB
4 Cangzhou Xi Station to (DIXIN roll forming machine factory)
I pick you up at Cangzhou West Station or Beijing Airport
In my car, about 45 minutes!
Near my factory, there is hotel and resturant!
5 There, you can see our machines's production and factory.
6 If business goes smothly, we have spare time!
I can take you around about some interests places!
7After finishing all, I can take you back to Cangzhou Xi Station or Beijing Airport!

G. Contact: Andy li
Cangzhou Dixin Roll Forming Machine Co., Ltd.
Add: Fuzhuang Develpoment Zone, City Botou, Province Hebei, China
Tel: 0086-18231723279
You can call me at any time

ADVANTAGES
1Direct manufacturer Since 2008
2 Golden customer evaluation and complete after-sale service
3 CE, SGS, BV, TUV-
4 Custom design to satisfy trader, factory or personal use
5 Environmental protection production line, no harm to environment and animal
6 Easy communication and feedback, professional advice for free
7 Engineer service in your factory available and economic

The disc of the lift Check Valve seats on the valve seat seal surface on the valve body. In addition to the valve flap can be freely raised and lowered, the rest as the stop valve, the fluid pressure makes the valve flap lifted from the valve seat sealing surface, the media back to cause the valve flap to fall back to the valve seat, and cut off the flow. Depending on the conditions of use, the valve flap can be of all-metal construction or it can be in the form of a rubber gasket or rubber ring embedded in the valve holder.

Lifting Check Valve

Lifting Check Valve,Cast Lifting Check Valve,Standard Flange Lifting Check Valve,Connection Type Lifting Check Valve

Henan Yunyu Mechanical Equipment Co., Ltd. , http://www.yunyuvalve.com